User manual VOLTA U145

[. . . ] Ultimately, this will mean more than $1 billion a year in energy savings for consumers. The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution that contributes to global warming. If every American family replaced their electronic equipment with ENERGY STAR® labeled models, it would reduce air pollution equivalent to eliminating more than two million cars. By using labeled products, you will save money on your electric bills and use less energy. [. . . ] When the power is turned on, you can open or close the CD compartment cover by pressing the (OPEN/CLOSE) button. Caution: z Do not stop or move the CD compartment cover manually. Z Be careful not to jam your fingers in the CD compartment cover. Main unit operation: 1 Press the BASS/TREBLE button until "BASS" appears on the display. Main unit operation: 1 Press the BASS/TREBLE button until "TRE" appears on the display. Within 1 minute, press the PRESET ( or ) button to adjust the hour and then press the MEMORY button. This may be operated only with the remote control. Within 1 minute, press the PRESET ( or ) button to adjust the minutes and then press the MEMORY button. Press the CLOCK button and within 3 seconds, press the MEMORY button. Z The hour will not advance even if minutes advance from "59" to "00". Within 1 minute, press the PRESET ( or ) button to select 12-hour or 24-hour display and then press the MEMORY button. Z If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. , , To locate the beginning of a track To move to the beginning of the next track: Press the button for less than 0. Z You can skip to any track by pressing the button repeatedly until the desired track number appears. To restart the track being played: Press the button for less than 0. Z You can skip to any track by pressing the button repeatedly until the desired track number appears. For audible fast forward: Press and hold down the For audible fast reverse: Press and hold down the button during playback. To repeat a programmed sequence: Perform steps 1 - 5 in the "Programmed Play" section and then select the repeat playback. Notes: z In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks. ) z If you press the button during random play, you can move to the track selected next by the random operation. On the other hand, the button does not allow you to move to the previous track. [. . . ] If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in step 1, unplug and plug in the unit, and then turn the power on. 3 If neither step 1 nor 2 restores the unit, do the following: Press the POWER button to enter the power stand-by mode. Unplug the AC power lead from the AC INPUT socket on the unit. [. . . ]