User manual VOLTA U3202

[. . . ] Volta reserve the right to alter product appearance and/or specifications without notice. Not all models featured are available in all countries. Volta vacuum cleaner features and accessories are protected worldwide by Patents or Registered Designs. E Tack för att du valde en dammsugare från Volta. [. . . ] 2 Insert that the hose until the catches click to engage (press catches inwards to release). 3 Attach the telescpoic tube to the hose handle and floor nozzle by twisting together (twist and pull apart to dismantle). 4 Extend the cable and connect to mains, ensuring the cable is not twisted before use (Press cable rewind button to rewind cable. Please hold the plug to prevent it striking you). 5 Press the on/off button to start the cleaner. 6 To increase/decrease suction, adjust the rolling wheel control. Suction can also be regulated on the hose handle by opening/closing the vent. Accessories Dustbag Swivel hose and handle with manual suction control Telescopic tube Combination carpet/hard floor nozzle Narrow crevice nozzle Upholstery nozzle Features of the vacuum cleaner Ensuring your safety The cleaner is for domestic use only and has been designed to ensure maximum safety and performance. Please follow these simple precautions: The cleaner is double insulated so it must not be earthed The cleaner is only to be used by adults Do not pick up very fine dust (plaster, cement, cold cinders. . . ) Always store in a dry place Do not use to pick up liquids Avoid sharp objects Do not pick up hot cinders or lighted cigarette ends Do not use near flammable gases Avoid tugging on the mains cable and check cable regularly for damage Note: Do not use cleaner with a damaged cable. If damaged the cable should be replaced at a service centre The plug must be removed from the socket outlet before cleaning or maintaining the appliance All service and repairs must be carried out by authorised service staff A B C D E F G H I J Mains cable On/off button Mechanical dustbag full indicator Hose connection Carrying handle Cover release catch for dustbag compartment Cable rewind button Parking position for tube and nozzle when in use Storage slot for tube and nozzle when not in use Suction control regulator Getting the best results Carpets: Use floor nozzle with lever in this position. Hard floors: Use floor nozzle with lever in this position. Loose rugs/curtains/lightweight fabrics: Reduce the suction power. Use the floor nozzle for loose rugs and the upholstery nozzle for curtains, cushions etc. Confined areas: Use the crevice nozzle for tight corners and radiators etc. U3201, U3202, U3210 2 Dustbag indicator and changing the dustbag For peak performance the dustbag should be changed when full. The mechanical dustbag indicator window will gradually turn red when filling and completely red when full. If the dustbag should get broken in the cleaner, take cleaner to service centre for cleaning. The dustbag full indicator may signify that the bag is blocked (occasionally caused by finer dust) which will cause loss of suction and may result in overheating. If this occurs change the bag even if it is not full. DO NOT VACUUM VERY FINE DUST (PLASTER, CEMENT, COLD CINDERS. . . ). [. . . ] Power: if the electric power does not come on, disconnect from mains and check plugs, cable and fuses where appropriate. The cleaner may switch itself off in event of severe blockage or excessively dirty filters. In such cases, disconnect from mains and allow to cool for 30 minutes. [. . . ]