User manual VOLTA UB156C

[. . . ] Please hold the plug to prevent it striking you). 5 Press the on/off button to start the cleaner. 6 To increase/decrease suction, adjust the rolling wheel control. [. . . ] Please follow these simple precautions: The cleaner is double insulated so it must not be earthed The cleaner is only to be used by adults Do not pick up very fine dust (plaster, cement, cold cinders. . . ) Always store in a dry place Do not use to pick up liquids Avoid sharp objects Do not pick up hot cinders or lighted cigarette ends Do not use near flammable gases Avoid tugging on the mains cable and check cable regularly for damage Note: Do not use cleaner with a damaged cable. If the cable is damaged, it should be replaced at a service centre The plug must be removed from the socket outlet before cleaning or maintaining the appliance All service and repairs must be carried out by authorised service staff Getting the best results Carpets: Use floor nozzle with lever in this position. Hard floors: Use floor nozzle with lever in this position. Loose rugs/curtains/lightweight fabrics: Reduce the suction power. Use the floor nozzle for loose rugs and the upholstery nozzle for curtains, cushions etc. Confined areas: Use the crevice nozzle for tight corners and radiators etc. Hard floor/Parquetry: use the hard floor nozzle to avoid scratching (some models). 3 s-bagTM indicator and changing the s-bagTM For peak performance the s-bagTM should be changed when full. The mechanical s-bagTM indicator window will gradually turn red when filling and completely red when full. If the dust bag should get broken in the cleaner, take cleaner to service centre for cleaning. The original filtering performance is now restored. Replace the unit back into the cleaner and close cover ensuring it is securely in place and the cover is properly closed. Latest every second year replace the old filter with a new one. To maintain Exhaust filter/Micro filter (some models): 12 Press the catch to open the filter cover. 13 Remove the filter unit, rinse the filter under warm tap water only and dry the filter completely (14). The original filtering performance is now restored. Replace the unit back into the cleaner and close cover ensuring it is properly fastened. Latest every second year replace the old filter with a new one. Troubleshooting Dustbag: please check that the dustbag is placed correctly and ensure that it is not jammed. (10) Power: if the electric power does not come on, disconnect from mains and check plugs, cable and fuses where appropriate. [. . . ] (10) Power: if the electric power does not come on, disconnect from mains and check plugs, cable and fuses where appropriate. The cleaner may switch itself off in event of severe blockage or excessively dirty filters. In such cases, disconnect from mains and allow to cool for 30 minutes. [. . . ]