User manual VTECH 3IN1 SMART WHEELS 70500

[. . . ] The 3-in-1 Smart WheelsTM grows along with baby. Use the activity panel on its own when baby is still stationary. As baby gains confidence in his/her sitting and standing abilities, convert the unit to the rocker mode. When baby becomes a skilled walker, he/she will be able to explore many new places with the ride-on mode. [. . . ] Tighten the screws to secure the legs into the main body. Please ensure the legs are fully inserted and secured into the main body to avoid injury. Changing Rocker/Ride-on Position To change the position from ride-on to rocker and rocker to ride-on, please follow these steps. Unscrew the large screw located in the center of the leg. 2. Turn the leg 180°, then secure the screw. Please ensure the screws are tightly secured to avoid injury. 18 0° 3. Repeat the above steps for the other side. Product Storage 1. Remove the activity panel from the handles following the instructions above. Remove both legs by unscrewing and removing the large screws located in the center of the legs. PRODUCT FEATURES 1. ON/OFF SWITCH To turn the unit ON, slide the ON/OFF SWITCH to the ON ( ) position. To turn the unit OFF, slide to the OFF ( ) position. Instructions & Activities 6 2. AUTOMATIC SHUT-OFF To preserve battery life, the VTech® 3-in-1 Smart WheelsTM activity panel will automatically power-down after approximately 30 seconds without input. Press any of the buttons to turn the unit back on. MODES OF PLAY Select from one of the three modes of play including LEARNING, DISCOVERY and MUSIC on the activity panel. Slide the MODE SELECTOR SWITCH to choose a mode. The activity panel can be used on the floor to activate the stand-alone mode, or it can be used in the ride-on position to activate the ride-on mode. Stand-alone mode Learning Discovery Music Ride-on mode As baby grows and has the ability to sit and stand, you can convert the unit to the rocker or ride-on modes. Rocker mode 4. LIGHT-UP SCREEN The LIGHT-UP SCREEN will reward toddlers with a variety of animations as they interact with all the features on the activity panel. Instructions & Activities 7 ACTIVITIES 1. Turn the on/off switch to turn the unit on, then slide the mode selector switch to choose a mode of play. Place the activity panel onto the floor to activate the stand-alone mode. In the learning mode, you will learn about colors, shapes and fun driving sounds. In the discovery mode, you will hear fun role-play phrases and sounds. In the music mode, you will hear a variety of melodies and sounds. Learning mode CIRCLE! Discovery mode HELLO! Music mode 3. Attach the activity panel to the handle to activate the ride-on mode. [. . . ] Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]