User manual VTECH BS2621

[. . . ] Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use this product near water (for example, near a bath tub, kitchen sink or swimming pool). [. . . ] The Handset will ring for approximately 20 seconds. The Handset will display PAGE FROM BASE. To end the page, press PAGE on the Base or any key on the Handset except for OFF or the three softkeys. Handsfree Speakerphone Operation Your 2621 Handset has a built-in handsfree speakerphone. This feature allows you to stand the Handset upright on a table or desktop and have handsfree conversations. For more information, refer to MAKING CALLS in the HANDSET AND BASE OPERATION section. Advanced Operations Extension in Use Indication When the telephone line is currently being used by a parallel set (a telephone or other device other than the 2621 on the same line); the phone icon will remain on steadily, and EXTENSION IN USE will be displayed. Low Battery Indication When a low battery is detected, the battery icon will flash and a warning beep will sound. The status message LOW BATTERY will be displayed when the Handset is in idle mode. To prevent an unexpected call drop, a drained Handset battery should be replaced by a fully charged spare battery. 20 Handset and Base Operation Message Waiting Indication The 2621 is compatible with optional voicemail service provided by some local telephone companies. If you subscribe to this service and you have new, unplayed messages in your voicemail, a Visual Message Waiting Indicator (VMWI) signal is transmitted by your local telephone company. The 2621 will detect a VMWI signal and activate the Message Waiting lights on the Handset and Base. After you check your messages, the Message Waiting indicator will automatically turn off. Please note that whenever new, unplayed messages are stored in your voicemail, the local Telephone Company will continue to send a VMWI signal. Call Waiting Deluxe Your 2621 is compatible with Call Waiting Deluxe. In order to use this feature you must subscribe to this service through your local telephone company. Your 2621 will automatically enter into Call Waiting Deluxe mode if you receive a call waiting signal. Upon receiving a call waiting signal, the caller ID information will be displayed. Call Waiting Deluxe mode will be indicated on the Handset for 15 seconds at which time you can disposition the call using the following options: CALL WAITING DELUXE MODE Function End the 1st call and answer the 2nd call Place the 1st call on hold and answer the waiting call Add the waiting call to your first call Send a hold message to your waiting call Forward the waiting call to your Voicemail Press: 5 FLASH 3 6 9 · Voicemail service, provided by your local telephone company, is required. If you do not wish to disposition a call, simply press EXIT. 21 Advanced Operations Custom Pay-Per-Use(PPU) Features Press BILLED SERVICES. Screen displays: Use to scroll to the desired option, then press OK to select. - OR Please the corresponding number from the keypad to select the desired function. For example, pressing 3 will select REPEAT DIALING. AUTO CALL BACK dials the last party who called you, whether or not you answered the call. [. . . ] This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. Notice: The Ringer Equivalence Number (REN) for this terminal equipment is 0. 1. [. . . ]