User manual VTECH I6764

[. . . ] Before using this telephone, you must read the Important safety instructions on page 33 of this manual. NEED HELP? This manual has all the feature operations and troubleshooting you need to install and operate your new VTech telephone. Please take the time to review thoroughly to ensure proper installation of this VTech innovative and feature rich product. You can also visit our website at www. vtechphones. com for support, shopping, and everything new at VTech. In Canada, please visit www. vtechcanada. com. [. . . ] If you record longer memo, 99 continues to flash until you finish. To stop recording, press PLAY/ STOP. Call screening . Set the base playback volume to a level greater than 1 to hear messages as they are left. Press /FLASH on the handset, to pick up the call. The answering system will stop recording. If you don't want to screen messages, set the volume level to 1. 29 Answering system operation Answering system operation Message window display Window displays 0 1-98 0-99 F To indicate: No messages in any mailbox. Total number of messages in all mailboxes. Memory is full or total number of messages is 99. Duration of announcement or memo recording. (Maximum length of announcement is 90 seconds. ) Length of recording is more than 99 seconds. New message number during message playback. Indicates volume level selected when VOL- or VOL+ is pressed. Current remote access code while setting. Displayed when any setting is changed to on or off. System is answering a call or is in remote operation. System is in programming mode or initializing. Counting 1 to 99 99 (Flashing) 1-99 (Flashing) 1-8 (Steady for one second) 40-99 A On or Off (Steady for one second) CL -- (Steady) -- (Flashing) (Normal display) Answering system operation 30 Answering system operation Remote access You can access many features of this system remotely from a touch tone phone. When the system answers, enter your remote access code (preset to 50). The system beeps once and announces the number of new messages on the system. Enter a remote command (see Remote access commands below). Press * 0 to exit remote operation. Voice menu The system has voice prompts to help you with remote operation. Press * 5 to hear the menu while remotely connected to the answering system. Remote access commands Function: Play messages in a mailbox Press #, then the desired mailbox number (1, 2 or 3). If there are no new messages the system plays old messages. [. . . ] If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty. [. . . ]