User manual VTECH T 2415

[. . . ] Cordless Telephone System With Caller ID t 2415 Caller ID/call waiting* 90 Name and number caller ID memory Voice mail waiting indicator** Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use this product near water (for example, near a bath tub, kitchen sink or swimming pool). [. . . ] If you wish to change how the number is dialed, press #. The screen displays alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number). DIAL flashes on the screen. DIAL PROGRAM 800-595-9511 5/01 5:40PM Basic Operation 4. - OR When the number is correctly displayed for dialing, press PHONE. Store a Call History Record in the Directory 1. Locate the record in the call history you want to store in the directory. If you wish to change how the number is stored, press #. The screen displays alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number). Press SEL, then press until PROGRAM flashes. DIAL PROGRAM 800-595-9511 5/01 5:40PM 4. Press or to select Y or N for distinctive ringer. If you choose Y in step five a D will be displayed with the directory entry. 18 Caller ID Operation Display Screen Messages Screen Displays: PRIVATE UNKNOWN When: The other party is blocking name and/or number information. Your phone company is unable to receive information about this caller's name and/or number. * (after the name) This caller has called you more than once. 19 Basic Operation Batteries Battery Care and Maintenance · Maximum talk time on a fully charged battery is approximately 6 hours. · The Battery needs charging when: -- A new battery is installed in the Handset. -- The phone beeps twice every five seconds. BATTERY -- The screen displays BATTERY LOW and the low battery icon. · · LOW Basic Operation · Place the Handset in its Base so the CHARGING light turns on. The Battery is typically fully charged in 12 hours. You can keep the battery fully charged by returning the Handset to its Base after each use. If you repeatedly get a low battery indicator, even after charging overnight, the battery should be replaced. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in the User's Manual. Replacing the Handset Battery 1. Remove the battery compartment cover on the Handset by pressing on the indentation and sliding the cover downward. Lift out the old battery and disconnect. Align the two holes in the new battery's plug with the socket pins, and snap the plug into place. [. . . ] It does not imply that Industry Canada approved the equipment. Notice: The Ringer Equivalence Number (REN) for this terminal equipment is 0. 1. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the Supplier. [. . . ]