User manual VTECH T2416

[. . . ] IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] A fully charged battery provides an average talk time of about six hours. · The battery pack needs charging when: -- A new battery is installed in the Handset. -- The phone beeps twice every 5 seconds. -- The screen displays BATTERY LOW and the low battery icon. · Place the Handset in the Base so the CHARGING light turns on. The battery pack is typically fully charged in eight hours. · You can keep the battery fully charged by returning the Handset to the Base after each use. · If you repeatedly get a low battery indicator, even after charging overnight, the battery should be replaced. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this User's Manual. Replacing the Handset Battery Pack 1 Remove the battery compartment cover on the Handset by pressing on the indentation and sliding the cover downward. 2 Lift out the old battery pack and disconnect. 3 Align the two holes in the new battery pack's plug with the socket pins, and snap the plug into place. Place the battery pack in the compartment with the wires in the lower left corner, along the bottom of the battery pack. 4 Replace the cover by sliding it up into place. 5 The new battery pack must be charged before using the phone. Place the Handset in the Base and allow it to charge for at least 12 hours the first charge. The telephone might operate before that, but for best performance, let the battery pack charge fully. BASIC OPERATION 18 IN CASE OF DIFFICULTY If you have difficulty operating this phone, try the suggestions below. For Customer Service, call 1-800-595-9511. Please retain your receipt as your proof of purchase If the phone doesn't work at all, check these items first: · Make sure the AC adapter is plugged into an outlet not controlled by a wall switch. · Make sure the telephone line cord is plugged firmly into the base unit and the modular jack. · If the Handset does not beep when you press PHONE, the battery might need charging. · Make sure the battery pack is installed correctly. [. . . ] IC (Industry Canada) This telephone is registered for use in Canada. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Notice: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. [. . . ]