User manual VTECH V 2568

[. . . ] IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. 3. Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. [. . . ] DIAL PGM ERASE 973-555-0123 5/01 5:40PM OLD 28 or until 2 Press SELECT. The screen displays ERASE NO YES ALL and 3 Press 4 5 the phone number. or until ALL flashes, then press SELECT. Press SELECT. You will hear a a long beep confirming the deletion. Dial a Displayed Number 1 Locate the record in call history that you want to dial. 2 If you wish to change how the number is dialed, press # . The screen 3 displays any alternate dialing sequences available for this call (area code + number; 1 + area code + number; 1+ number; number only). Press SELECT, then press or until DIAL flashes. DIAL PGM ERASE 5/01 5:40PM OLD 973-555-0123 28 4 Press SELECT . --OR-- When the screen displays the number you want to dial , press PHONE . 22 CALLER ID OPERATION Store a Call History Record in the Directory 1 Locate the record in call history you want to store in memory. 2 If you wish to change how the number is stored, press # . The screen 3 displays any alternate dialing sequences availablefor this call (area code + number; 1 + area code + number;1+ number; number only). Press SELECT, then press or until PGM flashes. DIAL PGM ERASE 973-555-0123 5/01 5:40PM OLD 28 4 Press SELECT three times to store the call record in memory without editing. DISTINCTIVE RING?Y 973-555-0123 5/01 5:40PM OLD 28 5 Press or to select Y or N for distinctive ring option. You'll hear a beep confirming that the name and number were stored. Display Screen Messages Screen Displays: PRIVATE When: The other party is blocking name and/or number information. Your phone company is unable to receive information about this caller's name and/or number. OUT OF AREA 23 ANSWERING SYSTEM OPERATION AT THE BASE Audible Indicators This system gives you voice prompts for feature operations and voice confirmations when you press a button or complete an operation. Setting Date/Time 1. The system announces the clock setting then an nounces; "To set Date and Time, press TIME/SET. " Press TIME/SET. Press SELECT until the system announces the correct day, then press TIME/SET. Press SELECT until the system announces the correct hour, then press TIME/SET. Press SELECT until the system announces the correct minutes (press and hold SELECT to advance by 10), then press TIME/SET. The system announces the current clock setting. About Mailboxes This answering system has three voice mailboxes. Callers using a touch tone phone can select the mailbox in which their messages will be recorded by pressing 1 , 2 , or 3. All other messages will be recorded in Mailbox 1. About Announcements · · · · You can record up to two different announcements -- one for normal answering and one for when you've set the system to play the announcement only. Use normal answering when you want the system to record callers' messages. Use Announce Only when you want to give information to callers without accepting messages. If you choose not to record an announcement, the system answers with a pre-recorded announcement. The normal answering pre-recorded announcement says: "Hello. I'm unable to answer your call right now. [. . . ] The REN is useful in determining the number of devices you may connect to your telephone line and still enable the devices to ring when you receive a call. The general rule is that the REN value should not exceed 5. 0A total; however, contact your local telephone company for the specific number in your area. IC (Industry Canada) This telephone is registered for use in Canada. Notice : The REN assigned to this device denotes the number of devices you may connect to the telephone loop which is used by the device to prevent overloading The termination on a loop may consist of any combination of devices subjected only to the requirement that the sum of the REN does not exceed five (5. 0) Notice : The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. [. . . ]