User manual VTECH VT 1311

[. . . ] Replace the battery cover carefully. Low Battery Alert: When the batteries are low, the display on the radio will flash for indication, and transmitting will be disabled. Replace the batteries to avoid interrupted use. Note: 1. Please remove the batteries if they are discharged or before storing your radio for extended periods. Batteries corrode over time, and if left in the radio may cause permanent damage. [. . . ] Turn the radio on while pressing the UP button. "SC" and "CTS" will appear for indication. Scan activates only when a signal is received and stops when the correct CTCSS code is decoded, which will then be selected automatically. Press the MODE or PTT buttons, or turn the radio off to exit CTCSS code scan mode. Note: When Key Lock feature enabled, Channel Scan and CTCSS Code Scan can not be activated. Normally, the LCD backlight will turn on when any button except the PTT is pressed and turn off again after 5 seconds except when the radio is scanning. The backlight can be permanently illuminated by the following procedure. Turn the radio on while pressing the MODE button. "bL"(Backlight) will appear for indication. To return to the normal backlight feature, repeat the same procedure described above and "oF" will appear for indication. To Transmit CTCSS Code Scan Thank you for purchasing this license-free personal communication V-Talk two-way radio for Family Radio Service (FRS) designated frequencies. IMPORTANT Please read this manual carefully and completely before attempting operation. WARNING · · Do not operate the radio when driving a vehicle or riding a bicycle. Do not operate the radio near unshielded electrical blasting caps or in an explosive atmosphere. Changing or modifying the radio could void the user's authorization to operate this radio. Never open your radio case. Time-out Timer 3 AAA BATTERY · FCC INFORMATION Do not open your radio to make any internal adjustment. Your radio is set to transmit a regulated signal on an assigned frequency. It is against the law to alter or adjust the settings inside the radio to exceed those limitations. OPERATION To Turn the Radio On 1. The radio will beep and the operating channel number will appear to indicate the radio is on. To turn the radio off, press the POWER button for 1 second. Turn the radio on, then press the UP/DOWN Backlight Control INTRODUCTION With the VTech two-way radio, you can talk with another person who has a similar radio To Select an Operating Channel Communication Range Beep You can mute the beep sound by the following procedures. Turn the radio on while pressing both the UP and DOWN buttons. "oF" will appear for indication. To activate the beep again, repeat the procedures described above and "bP"(Beep) will appear for indication. TROUBLESHOOTING Symptom Display is dark No transmitter output Solutions Reposition or replace batteries 1. Be sure the PTT button is pressed completely when transmitting. [. . . ] Call VTech Communications customer service for Return Authorization at:: 1-800-595-9511 Properly pack your unit. Include any cables & accessories, which were originally provided with the product. We recommend using the original carton and packing materials. Include in the package a copy of the sales receipt of other evidence of date of original purchase (if the unit was purchased within the last twelve months). [. . . ]