User manual VTECH VT 2151

[. . . ] Handset Base Unit Telephone line cord Battery Power Adapter User's Manual To purchase replacement batteries, call VTech Communications at 1-800595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377. 1 Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Follow all warnings and instructions marked on the product. [. . . ] Press MENU to move on to the next feature, or press PLAY/STOP to exit feature setup. Answering System Operation Listen to, Save & Delete Messages The system automatically saves your messages until you delete them, and can store approximately 15 minutes of messages, memos, and announcements (up to a maximum of 99 messages). A message or memo can be up to four minutes long. The message window will flash to alert you to new, unplayed messages. If all messages have been reviewed, the number displayed in the window will glow steadily. If the system contains both old and new messages, it will play only the new messages first. After all new messages are played, press the PLAY/ STOP to hear all messages. NOTE: If the system has less than 30 seconds of record time left, the answering system turns off. The system will answer after 10 rings and announce "Memory full, please enter your security code" and wait for the caller to enter the remote access code. Before playing a message, the system announces the day and time it was received. While the message plays, the message window displays the number of the message. After playing the last message in a mailbox, the system announces " nd of messages. " If the system has less than five minutes of recording time E left, it announces remaining time. Message Window Press to skip to the next message; hold to speed up playback. Play Messages Press to play messages in a mailbox. Press again to stop playback. Feature Summary Default settings indicated by * . System announces: Description/directions: System announces: Description/directions: "Set Security Code" 19 * Set the remote access code you will use to access features and functions of the answering system from a touch tone phone. You can select any two digit code, from 10 to 99. NOTE: To advance the remote access code by increments of 10, press and hold CHANGE. "Set Audible Message Alert " Off * On "Set Announce Only" Off * On "Set Base Ringer" On * Off "Set Number of Rings" 2 4* 6 Toll Saver When message alert is turned on, the base beeps once every 10 seconds when new messages have been received. When you turn announce only on, callers hear your announcement, but cannot leave a message. Turn the base ringer on or off. Choose how many times the phone will ring before the system answers a call. Delete Messages · To delete a message, press · DELETE while the message is playing. · Press and hold DELETE button to delete all old messages in that mailbox. You cannot delete a message until it's been reviewed; deleted messages cannot be recovered. Press to repeat a message; hold to slow down playback With toll saver active, the system answers after two rings when you have new messages and after four rings when you have no new messages. NOTE: You can exit feature setup at any time by pressing a PLAY/STOP. 14 15 Answering System Operation Call Screening/Intercept 1. Make sure the answering system is on, and set the message playback volume control above level 1 so you can hear the caller' message. If you decide to take the call, press /FLASH on the handset. If you pick up an extension phone during the announcement and the announcement does not stop right away, press and release the telephone switchhook. [. . . ] Testing the emergency telephone numbers you have stored is not recommended. However, if you do make a call to an emergency number: · You must remain on the line and briefly explain the reason for the call before hanging up. · Programming/testing of emergency numbers should be performed during off-peak hours, such as in the early morning or late evening, when the emergency services tend to be less busy. IC (Industry Canada) This telephone is registered for use in Canada. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. 5. Hearing aid compatibility If this product is equipped with a corded or cordless handset, it is hearing aid compatible. 26 27 FCC, ACTA and IC Regulations Notice: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. [. . . ]