User manual VTECH VT 2434

[. . . ] Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] Do not force the connection. NOTE : Whenever a compatible Headset is connected to the cordless Handset, the microphone on the Handset will be muted. This is done to limit the effect of background noise. Belt Clip The gz 2434 is also equipped with a detachable belt clip. Align the pins on the inside edge of the clip with the notches on the sides of the Handset. The belt clip should snap securely into place. Do not force the connection. 17 IN CASE OF DIFFICULTY For Customer Service, call 1-800-595-9511. Please retain your receipt as your proof of purchase If the phone doesn't work at all, check these items first: · Make sure the AC adapter is plugged into an outlet not controlled by a wall switch. · Make sure the telephone line cord is plugged firmly into the base unit and the modular jack. · Make sure the Base antenna is fully upright. · If the Handset does not beep when you press PHONE, the battery might need charging. · Make sure the battery pack is installed correctly. · If you have dial pulse (rotary) service on your phone line, make sure the dial mode is set to dial pulse (see Telephone Operation). · Microwave appliances may cause interference with this phone. If you experience interference, move away from the microwave If the above suggestions don't solve the problem, try re-initializing the Handset and Base: 1 Disconnect the power to the Base. 6 Put the Handset in the Base to re-initialize. If you hear a two-beep signal when you try to use the handset: · You might be out of range. · If moving closer to the Base doesn't help, try following the directions above for re-initializing the Handset and Base. If the phone does not ring when you receive a call: · Make sure the Handset ringer is on. · Make sure the telephone line cord is connected firmly to the Base and the telephone jack. · Make sure the AC adapter is plugged firmly into an outlet not controlled by a wall switch. · You might be too far from the Base; move closer. · You might have too many extension phones on your telephone line to allow all of them to ring. If you hear noise or interference when using the phone: · Make sure the Base antenna is fully upright. [. . . ] 9 Operating Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Display Screen Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Telephone Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Store a Number/Name in the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]