User manual VTECH VT 2467

[. . . ] Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. 10. 11. Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. [. . . ] 5. * 6. Playing Messages Remotely 1. Press " #1 ", " #2 " or " #3 " on the touch tone keypad to play the messages in the corresponding mailbox. The system will announce "Mailbox X. You have XX new messages and XX old messages" and the system will playback the new message only. If there are no new messages, the system will announce "Mailbox X. On the other hand, in the absence of old messages, the system will announce only the number of new messages. Repeat Messages During Playback 1. Press "#4" once during message playback to repeat the current message. Press "#4" twice within 2 seconds to skip to the previous message. 39 Itad Operation Remote Operation Of Answering System Skip Messages During Playback 1. Press "#6" once to skip forward to the next message. Stop Message Playback 1. Pressing "#5" during message playback will stop playback. Deleting Messages 1. Press "#9" once during message playback to delete the current message. Note: Playback will pause if "#" or " " is entered. Answering System will wait for the command in the following 2 seconds. If no further tone is entered, playback will be resumed. * Memo Recording 1. After selecting the mailbox by entering command "1", "2", "3", You will hear, "Now recording", followed by a beep. Enter "#5" to stop recording when you have finished. * Change OGM Remotely Enter " 7" to record a new OGM. You will hear, "Now recording", followed by a beep to signal start of recording. Your new OGM will playback automatically. * Check OGM1 Remotely Enter "#7" to review OGM. You will hear playback of OGM followed by a beep. Itad Operation Turning Answering System ON or OFF Pressing "#0" toggles the Answering System ON/OFF. "Answer machine on", or "Answer machine off" will be announced, followed by a beep. 40 Remote Operation Of Answering System Voice Menu for Remote Operation The system provides two pre-recorded voice menus to help you during remote operation. Press " 5", and you will hear the simple voice menu. * The simple voice menu is as follows: Press "#1" to play mailbox 1. Press "#4" to repeat the message. Press "#6" to skip the message. [. . . ] This equipment may not be used on coin service provided by the phone company or Party Lines. The REN is useful in determining the number of devices you may connect to your telephone line and still enable the devices to ring when you receive a call. The general rule is that the REN value should not exceed 5. 0A total; however, contact your local telephone company for the specific number in your area. Additional Information IC (Industry Canada) This telephone is registered for use in Canada. Notice : The REN assigned to this device denotes the number of devices you may connect to the telephone loop which is used by the device to prevent overloading The termination on a loop may consist of any combination of devices subjected only to the requirement that the sum of the REN does not exceed five (5. 0) Notice : The Industry Canada label identifies certified equipment. [. . . ]