User manual VTECH VT 2961

[. . . ] IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] 6. Press SELECT until the correct day is announced. Press SELECT until the correct hour is announced. Press SELECT until the correct minute is announced. Holding the key continuously will increase the minutes by 10 minute steps. You will hear an announcement of the day and time. DIGITAL VT 2961 900MHz MEMO ANSWER ON/OFF ANSWER SELECT TIME/SET SELECT MENU MENU CHARGING SPARE BATTERY DELETE NEW CALL TIME/SET 1 REPEAT 2 MAIL BOX PLAY/STOP SKIP 3 VOLUME SELECT MUTE INTERCOM CONF HOLD FLASH TIME/SET LINE 1 OFF LINE 2 7. MIC Set Audible Message Alert If you want your Answering System to beep once every 10 seconds to notify you when new messages have been received, set Audible Message Alert to ON. Press MENU until you hear "Set Audible Message Alert. " Set Audible Message Alert MENU CORDLESS ITAD OPERATION 2. Press SELECT until the desired setting, (ON or OFF) is announced. The voice prompt of "Audible Message Alert On" or "Audible Message Alert Off" will be heard. DIGITAL VT 2961 900MHz MEMO ANSWER ON/OFF ANSWER TIME/SET SELECT MENU MENU SELECT CHARGING SPARE BATTERY DELETE NEW CALL 1 REPEAT 2 MAIL BOX PLAY/STOP SKIP 3 TIME/SET VOLUME MUTE INTERCOM CONF HOLD FLASH LINE 1 OFF LINE 2 MIC 22 ANSWERING SYSTEM SETUP Set Announce Only CAUTION: If you turn on the Announce Only option, your callers cannot leave a message. Press MENU until "Set Announce Only" is announced. Press SELECT until desired setting "ON" or "OFF" is declared. Press TIME/SET to confirm, and the setting will be announced. Note: You can store one OGM for Announce Only mode, and a separate OGM for Normal (accept messages) mode. The appropriate OGM will be played based on how you set Announce Only. Set Call Screening Call Screening allows you to hear incoming messages at the Base Unit as they are being recorded. If you want to answer the call at once, just press the Handset or an extension phone, and the Answering System will stop recording. Press MENU until you hear "Set Call Screening" Press SELECT to toggle between ON and OFF. Press TIME/SET to confirm your selection. " Call Screening is ON (or OFF) will be announced. Set Number of Rings The Answering System has 4 ring type settings: 2 rings The incoming call is answered after 2 rings. CORDLESS DIGITAL VT 2961 900MHz MEMO ANSWER ON/OFF ANSWER MENU 4 rings The incoming call is answered after 4 rings. 6 rings The incomng call is answered after 6 rings. Toll Saver The incoming call is answered after 2 rings only if there are new messages/memos present. Otherwise, the call is answered after 4 rings. This may help you avoid long distance charges when retrieving messages remotely. TIME/SET SELECT MENU MENU CHARGING SPARE BATTERY DELETE NEW CALL SELECT 3 1 REPEAT 2 MAIL BOX PLAY/STOP SKIP VOLUME TIME/SET MUTE INTERCOM CONF HOLD FLASH LINE 1 OFF LINE 2 MIC 1. Press MENU until you hear "Set number of rings. " 2. [. . . ] This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The Department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. [. . . ]