User manual VTECH VT 5849

[. . . ] 5 Connect Power and Telephone Line Cords . 16 Edit a Number/Name Stored in Speed Dial . 17 Delete a Number/Name Stored in Speed Dial 18 Dial a Speed Dial Number . 19 Store a Number/Name in the Directory . [. . . ] You can choose to dial with or without the area code, or with or without the 1. Basic Operation 4. Press or to select Y or N for distinctive ringer. Press SELECT you choose Y in step 5, a directory entry. Display Screen Messages Screen Displays: PRIVATE UNKNOWN * (after name) When: The other party is blocking name and/or number information. Your phone company is unable to receive information about this caller's name and/or number. This caller has called you more than once. www. vtechphones. com BASIC OPERATION 25 Batteries Battery Care and performance: After your battery is fully charged, you can expect the following performance: · If you repeatedly get a low battery indicator, even after charging overnight, the battery should be replaced. · To reduce the risk persons or damage to the telephone, read and follow these instructions carefully: Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in the user's manual. · Operation While in use (talking) While not in use (standby*) * Handset is off the base unit or charger but not in use. Operating time up to 5 hours up to 6 days The battery needs charging when: -- A new battery is installed in the handset. -- The screen displays BATTERY LOW and the low battery icon. Place the handset in the base so the CHARGE light turns on. The battery is typically fully charged in 16 hours. You can keep the battery fully charged by returning the handset to the base after each use. · · Replacing the Handset Battery 1. Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward. Lift out the old battery and disconnect. Align the two holes in the new battery's plug with the socket pins, and snap the plug into place. Snap the battery in the compartment, as described in Installation, on page 5. Replace the cover by sliding it up into place. The new battery must be charged before using the phone. Place the handset in the base and allow it to charge for at before that, but for best performance, let the battery charge fully. 26 BASIC OPERATION www. vtechphones. com Troubleshooting trying these suggestions, call VTech Communications at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377. Problem My phone doesn't work at all. Suggestion · Make sure the power cord is plugged in. · Charge the battery in the handset for 16 hours. For optimum daily performance, return the handset to its base when not in use. [. . . ] The REN for this product is encoded please contact your local telephone company. This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. [. . . ]