User manual VTECH VT 5867QSG

[. . . ] You'll start by downloading the software into your computer. 12:00 PM i 5867 5. 8GHz SYSTEM QUICK START GUIDE HOLD 12:00 PM MUTE Setting the Time Incoming Caller ID/Call Waiting ID will set the clock automatically. If you wish to set the time manually: 1. The system will announce the current clock setting, then announce "To set date and time, press TIME/SET. " 3. Press CHANGE until the system announces the correct day, then press TIME/SET. [. . . ] You can delete the preset images in this directory to make room for more if you wish. Additional image samples can be found on the accompanying CD-ROM. Recordable Ringer To record a ringer, follow these steps: · · · Select the Sounds & Alerts icon in the Main Menu. Select the Sound Clips icon If you are using the Audio Patch Cord, insert the 3. 5mm plug (the larger end) into the headset jack of your PC or audio source. Insert the 2. 5mm plug (the smaller end) into the Headset jack on the side of the i 5867 Handset. You can listen to the playing music through your Handset speaker after connecting the Audio Patch Cord and selecting the Record Preview menu option. Adjust the recording volume at the audio source. If you want to use the Handset microphone to record ringers, select the Record Clip menu option. After the beep, and with the Handset microphone facing the audio source, start recording. NOTE: If the memory is full, the Handset will prompt Clip memory full! MID - Mid-Range sounds e n h a n c e d (This is the recommended setting for hearing aid users. ) 1 Caller ID/ Call Waiting ID - Handset View Caller ID/Call Waiting ID records by pressing the CID LOG softkey. Use the and NavKeys to review the records. Dialing from CID - If the CID record displayed is in the correct format for dialing, press ON or SPEAKERPHONE to dial your call. If it is not in the correct dialing format, press middle Navkey. With each press of # key, you will see 4 possible dialing formats, such as: Scroll to the desired option, then press ON or SPEAKERPHONE to dial the number. Registration and Operation of the Accessory Handsets Your i 5867 system can operate up to 8 Handsets. Accessory Handsets (models i 5803 or i 5807) are sold separately. To order accessory Handsets, replacement battery cells or Headsets, call VTech Communications Inc. at 1-800-595-9511 The original Handset that is shipped with your i 5867 system is already registered to the Base Unit. The steps below will assist you in registering additional Handsets as you expand your system. After charging the Handset, if it displays SEARCHING FOR BASE or ENTER BASE ID ###, you must register the Handset in order to use it. If the display says SEARCHING OR BASE, press NEW. The screen will now display ENTER BASE ID ###. Find the BASE ID Code on the underside of the Base Unit. Answering System Turn Answering System On/Off Press ON/OFF to turn the system on or off. When the system is turned on, the light inside the button will glow steadily. [. . . ] Press OK to complete the registration process. Searching for Base. . NOTE: When you want to use the Handset microphone to record ringers, do not insert the Audio Patch Cord into the headset jack. 3. Press OK then SAVE to store your entry. new Dialing from the Phonebook Sound Select During a call, you can adjust the quality of the sound to best suit your hearing. Pressing SOUND SELECT repeatedly will cycle you through four different frequency responses: BASS - Low Frequency sounds enhanced 6 Redial Press REDIAL to display the last 10 telephone numbers dialed from the Handset. [. . . ]