User manual VTECH VT 5874

[. . . ] 5 Connect Power and Telephone Line Cords . . 6 Edit a Number/Name Stored in Speed Dial . . 7 Delete a Number/Name Stored in Speed Dial . 9 Store a Number/Name in the Directory . [. . . ] Press again to stop playback . Call Screening/Intercept . Make sure the answering system is on, and set the message playback volume control above level so you can hear the caller's message . If you decide to answer the call, press PHONE on the handset . Record a Memo You can record a memo up to four minutes long, which is stored as an incoming message . The system announces "Record after the tone. Press STOP when you are done. " After the beep, speak toward the microphone . The message window displays the length of your memo up to 99 seconds, if you record a memo longer than 99 seconds, 99 continues to flash until you finish. To stop recording, press the PLAY/STOP again . 30 BASIC OPERATION www. vtechphones. com Answering System Operation At the Base Window Display: 0 1-98 0-99 <--> F 1 to 99 (counting) 99 (flashing) 1-8 (on steady for one second) 10 - 99 A 1-98 and A (alternating) ON or OFF (steady for one second) CL <--> (normal display) -- (steady) -- (flashing) When: No messages . Total number of messages, or message number during message playback . Memory is full, or total number of messages is 99 . Duration of announcement or memo recording (maximum length of announcement is 90 seconds) . Length of recording is more than 99 seconds . Indicates volume level selected when VOL- or VOL+ is pressed . Current remote access code while setting . System is set to announce only mode and the memory is full . Display when any setting is changed from on or off . System is answering a call or is in remote operation . System is in programming mode or initializing . Basic Operation www. vtechphones. com BASIC OPERATION 3 Answering System Operation - Remote Access Connect with the Answering System . When the system answers, enter your remote access code (preset to 19) . The system beeps once and then announces the number of new messages . Enter a remote command (see Remote Access Commands) . To end remote access, simply hang up the phone . You can access many features of this system remotely from a touch tone phone . Voice Menu The system has voice prompts to help you with remote operation . [. . . ] Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone company is required to notify you if such changes are planned . If this product is equipped with a corded or cordless handset, it is hearing aid compatible . If this product has memory dialing locations, you may choose to store emergency telephone numbers (e. g. , police, fire, medical) in these locations. [. . . ]