User manual VTECH VT 7100QSG

[. . . ] Parts Checklist Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service. Check to make sure the telephone packaging includes the following: 1. [. . . ] Note: The LCD will be blank until the batteries are charged enough to activate it. Place handset in base to charge for over 15 hours before first use. Installing the Telephone Base Install the base as shown in the diagram below. Choose a location away from electrical equipment, such as television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture. After connecting the telephone base to an available USB port on your computer, Windows will automatically detect and install the appropriate drivers. After charging the handset batteries for at least 15 hours, plug line cord into telephone jack. Installing the Software Before continuing, make sure the batteries in the handset are fully charged. Insert the CDROM and wait for the opening screen to be displayed. If the software installation program does not automatically start, you will need to launch it manually. From your desktop, double click My Computer, double click your CD-ROM Drive, and then double click "vtech_broad band_7100. exe". Click the Begin Installation button. USB 7100 Quick Start Guide Dual Line PC Internet Phone Computer Battery compartment cover CD-ROM Telephone base Telephone handset Batteries (2) Insert supplied batteries Replace cover Plug base power cord transformer into electrical outlet not controlled by a wall switch Plug USB cable into a USB port in your computer AC adapter USB cable Route wires under strainrelief tabs as shown Telephone line cord Belt clip Quick S tart Guide Underside of telephone base 1 2 3 4 3. Click the button to download and install Skype. Instructions to download the software and start the installation are provided on the web page. Follow the instructions in the Setup Wizard to complete the installation. The first time Skype is launched you will have the option to create an account, if you don't already have one. After completing the Skype installation, click the button to download and install the VTech Cordless Phone Suite software. Instructions to download the software and start the installation are provided on the web page. Once the applications have been installed, you will be prompted that the VTech Cordless Phone Suite software is trying to access Skype. [. . . ] Follow the instructions on screen to complete the installation. Click Exit to close the Installation CD screen. 96-005943-030-000 5 6 7 [. . . ]