User manual VTECH VT 912

[. . . ] To Change or Replace a Speed Dial Number . Storing a Redial Number into Speed Dial . 12 12 12 12 12 12 12 12 12 12 13 13 13 13 13 13 14 14 14 14 15 15 15 16 16 16 16 16 17 17 17 18 19 21 21 23 23 24 24 BASE UNIT FEATURES . . 25 26 28 29 31 1 INTRODUCTION Congratulations! [. . . ] To end the page at the base, press PAGE again. To end the page at the handset, press OFF. This feature is also useful if you have misplaced the handset. To locate the handset press PAGE at the base. This starts a paging tone at the handset. When it is located cancel the paging tone by pressing OFF on the handset. 18 CALLER ID Your VTech 912 ADLc cordless telephone is capable of displaying the name and number of the person calling, before you answer the phone. The unit is designed to store and display specific information provided by your local telephone company to subscribers of the "Caller Information and Identification Service" (Caller ID). When Caller ID service is active, your telephone company transmits certain information between the first and second ring of each call. This information includes the telephone number and name of the caller as well as the date and time of the call. For example: NUMBER ONLY: Caller ID service is based a relatively new technology. In some areas, Caller ID service is not fully supported, or not offered at all. Caller ID may not work properly in some areas due to local telephone company limitations and/or equipment incompatibility. Caller ID LCD and Icons Caller ID information is displayed on the Base LCD module. Each ICON has a specific function. MSG DATE/TIME RPT# CALL# NEW CALL NAME AND NUMBER: New Call Icon (NEW CALL) When activated, this icon alerts the users that new calls have been received. The NEW CALL icon will remain on until all new calls are reviewed. Call Counter (CALL#) This two digit counter indicates the position of CID record relative to other records stored in CID memory. This information is immediately displayed on the unit's LCD screen, enabling you to identify the calling party without having to answer the call. Simultaneously, this information is stored in memory for review at a later time. You must be in an area where Caller ID service is available and you must subscribe to this service to use this feature. Repeat Counter (RPT#) This digit counter is used to indicate when a specific call has been received more than once. If a call had been received twice, the RPT# counter would show a 1. The repeat counter is only active during Caller ID review when a repeat call comes in. 19 CALLER ID DATE / TIME Stamp The date and time fields are used to display the date and time information of a Caller ID record. Also, if no keys on the Caller ID module are touched for around 20 to 30 seconds, the display will default to Clock mode, and display the current date and time. Message Waiting Icon (MSG) The VTech 912 ADLc is capable of detecting a visual Message Waiting signal generated by some local phone company Voicemail systems. [. . . ] - Consult the dealer or an experienced radio/TV technician for help. for repair/warranty information. The telephone company may ask you to disconnect this equipment from the line network until the problem has been corrected. Your 912 ADLc is designed to operate at the maximum power allowed by the FCC. This means your handset and base unit can communicate only over a certain distance - which will depend on the location of the base unit and handset, weather, and the construction and layout of your home or office. 29 FCC REGULATIONS FCC Part 68 The FCC requires that you connect your cordless telephone to the nationwide telephone network through a modular telephone jack (USOC RJ11C or RJ11W). [. . . ]