User manual VTECH VT9121

[. . . ] Wall mounting bracket HANDSET BASE UNIT TELEPHONE LINE CORD AC ADAPTER BATTERY PACK WALL MOUNT BRACKET 1 IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] Each ICON has a specific function. MSG DATE/TIME RPT# CALL# NEW CALL detecting a visual Message Waiting signal generated by some local phone company Voice Mail systems. If you subscribe to Voice Mail services, and the visual Message Waiting signal is provided by your local telephone company, the MSG icon will be displayed when you have new messages waiting. If you do not use Voice Mail services, the MSG icon will not be utilized. Once you have checked your Voicemail messages, the central telephone office will send a signal to deactivate visual Message Waiting and the VTECH VT9121 will automatically deactivate the MSG icon. You must be in an area where Voice mail service is available and you must subscribe to this service to use this feature. Number Display Area The center line of the LCD is made up of 14 complete digits. This area of the LCD is used to display the phone number information of a Caller ID message. The displayed phone number will be right hand aligned. If the phone number is not available, this part of the display will be blank. Dot Matrix Area The bottom line of the LCD consists of 15 5x5 dot matrix characters. The VTECH VT9121 is capable of displaying callers name information. Caller ID name information will be displayed left-hand aligned. In addition to displaying the name information, the dot matrix area of the LCD also displays the following: New Call Icon (NEW CALL) When activated, this icon aler ts the users that new calls have been received. The NEW CALL icon will remain on until all new calls are reviewed. Call Counter (CALL#) This two digit counter indicates the position of CID record relative to other records stored in CID memory. Repeat Counter (RPT#) This digit counter is used to indicate when a specific call has been received more than once. If a call had been received twice, the RPT# counter would show a 1. The repeat counter is only active during Caller ID review when a repeat call comes in. DATE / TIME Stamp The date and time fields are used to display the date and time information of a Caller ID record. Also, if no keys on the Caller ID module are touched for 30 seconds, the display will default to Clock mode, and display the current date and time. Message Waiting Icon (MSG) The VTECH VT9121 is capable of 13 CALLER ID "## CALLS ## NEW" is displayed while in clock (standby) mode. This information tells you the total number of calls received and the total number of new (not reviewed) calls. "LINE ERROR" is displayed if errors are detected during the reception of Caller ID information. [. . . ] * Connect the equipment into an outlet or on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/ TV technician for help. FCC Part 68 The FCC requires that you connect your cordless telephone to the nationwide telephone network through a modular telephone jack (USOC RJ11C or RJ11W). Your telephone company may discontinue your service if your equipment causes harm to the telephone network. They will notify you in advance of disconnection, if possible. [. . . ]