User manual WACOM BAMBOO TOUCH

[. . . ] Contents Index 1 User's manual for Windows & Macintosh ® ® Bamboo Touch (CTT-460) Bamboo Pen (CTL-460) Bamboo & Bamboo Fun (CTH-460, CTH-461, CTH-661) Setting up Navigate with touch Customize touch ExpressKeys Use a pen Customize a pen Troubleshooting Contents Index 1 Contents Index 2 Bamboo User's Manual for Windows® & Macintosh® Version 1. 0, Rev E1209 Copyright © Wacom Co. , Ltd. , 2009 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. [. . . ] Returns a button to its default setting. INK TOGGLE TABLET PC · TABLET PC INPUT PANEL · JOURNAL EXPOSÉ PRESSURE HOLD MODE TOGGLE. . . DISABLED DEFAULT Contents Index 53 Contents Index 54 PROBLEMS WITH YOUR BAMBOO? Most of the time your tablet will work flawlessly. But if you are having trouble, Wacom recommends you do the following: 1. If the tablet driver failed to load properly, first perform the recommended action in any error message that may appear on your screen. If that does not solve the problem, review the troubleshooting procedures in this chapter. Your problem may be described there and you can try the solution offered. Open the tablet Read Me file and look for any information updates. If you are having a compatibility conflict between Bamboo and a new hardware or software product, see obtaining driver downloads for information on downloading an updated software driver. Wacom periodically updates the software driver to maintain compatibility with new products. Check the FAQs (Frequently Asked Questions) on the Wacom web site for your region. If you have tried the suggestions in this manual and still cannot resolve the problem, then contact Wacom for technical support. See technical support options and the Read Me file for information on where to obtain support for your region. Testing your tablet Testing a pen Troubleshooting tables Technical support options Obtaining driver downloads Contents Index 54 Contents Index 55 TESTING YOUR TABLET 1. Turn on your computer and wait until the system has fully loaded. The tablet status LED should glow whenever the tablet is properly connected and your computer has registered it as a USB device. If not: · · · · · · Make sure the tablet USB cable is securely connected to an active USB port on your computer. If you are connecting the tablet to a USB hub (or hub device such as a keyboard with USB ports), be sure the USB hub is properly connected to your computer and is active. If the status LED does not illuminate after your computer is on and has finished booting up, your USB port may be disabled. Verify that you have connected the tablet to an active USB port. Connect the tablet to a different USB port or try connecting to the USB port on another computer. Attempt to move the screen cursor by tracking your finger across the tablet surface. The status LED should brighten when you touch the active area of the tablet. [. . . ] The Input Panel dynamically converts your handwriting to text. The information you create can then be inserted into other documents, spreadsheets, or illustrations. See also pen and digital ink capabilities in Windows Vista. A method of interacting with a computer using only your fingertips on the Bamboo tablet. [. . . ]