User manual WACOM CINTIQ 17SX

[. . . ] www. wacom. com DTU-710 Interactive Pen Display Installation Guide & User's Manual Wacom DTU-710 Interactive Pen Display Installation Guide & User's Manual for Windows® & Macintosh® English version 1. 0, August 30, 2004 Copyright WACOM Company, Limited, 2004 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. [. . . ] (VGA only. ) Select to move the screen image left or right. To automatically adjust, use the RESET option. VERTICAL CENTER. (VGA only. ) Select to move the screen image up or down. To automatically adjust, use the RESET option. MENU POSITION. Select to move the OSD menu around the display screen. RESET. Provides two options: Use AUTO ADJUST to reset only the image parameters. Use RECALL to reset all screen options to the factory default. Selecting the EXIT icon exits the RESET window without resetting anything. CUSTOMIZING Page 24 BACKLIGHT. Select to increase or decrease the backlight brightness level. LANGUAGE. Select to choose a language option for the OSD. COLOR. Provides color temperature settings for 9300°, 6500°, and 5000° Kelvin. DIRECT displays the received signal as it is without any adjustment. When DIRECT is selected and a VGA connection is used, the BRIGHTNESS and CONTRAST settings are also set to DIRECT and cannot be adjusted manually. The USER option enables you to adjust Red, Blue, and Green independently. Choose a setting and press ENTER to activate your selection. Change the USER setting by selecting the ENTER icon. In the user adjustment COLOR window, change Red, Green, or Blue to calibrate color. Select the EXIT icon to exit. CUSTOMIZING Page 25 ADJUSTING PITCH AND PHASE (VGA ONLY) Some computers and video cards may not allow the multi-sync function to fully work when the DTU-710 is first connected. If some portion of text appears blurred, adjust pitch and phase by following the procedure below. For crisp images, set the resolution of your video card to 1280 x 1024. · · In the Tablet control panel, select the CALIBRATE tab. If you are working with multiple monitors, be sure the display corresponding to the DTU-710 is selected in the MONITOR menu. Click on the CALIBRATE button to activate the calibration screen. [. . . ] or Canada contact: Wacom Technical Support Phone: 1. 360. 896. 9833 Fax: 1. 360. 896. 9724 E-mail: support@wacom. com Warranty on Sales Outside of U. S. and Canada (Except Europe, Africa and Middle East) For products purchased or used outside of the United States and Canada, upon discovery of a defect in the product, except in the Software, within the Warranty Period you should contact your local dealer or distributor. In all other respects the terms of the warranty as set forth above apply to such sales. Should you have any questions about this Agreement, or if you desire to contact Wacom for any reason, please contact in writing: In North and South America contact: Wacom Technology Corporation 1311 SE Cardinal Court Vancouver, Washington 98683 U. S. A. In Asia and Asia Pacific contact: WACOM Co. , Ltd. [. . . ]