User manual WACOM CTF-220

[. . . ] English User's Guide CTF-220 Contents Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Component names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tablet Driver Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The Install Pen Tablet menu will display. Click OK and the license agreement will appear. After installation is complete, click OK and finish the installation. If you must renew your driver, click immediately Restart System and your computer will automatically restart. Refer to "Using the Control Panel" on page 12, open the control panel and adjust the pen settings and positions. Windows 98SE: The ADD NEW HARDWARE WIZARD will display. Follow the prompts, selecting the default options. If prompted to install drivers for the USB Human Interface Device, insert the Windows 98SE CD, click OK, and enter the location of the Windows CAB files (e. g. , D:\WIN98). Note that the files may be located on your hard disk in the C:\WINDOWS\OPTIONS\CABS folder. Uninstalling the Tablet Driver Click on the Windows Start button and open the control panel. Double click the Add and Remove Program (Application) icon. Select Pen Tablet from the list and click the Modify (Add) and Delete button. Follow the instructions in the dialog box to initiate uninstall. When Windows is restarted, the driver will be deleted. Basic Operation The Parts of the Pen and Their Functions Second Side Switch With one touch of the second side switch, functions that have been previously established become functional(double click by default). Pen Tip Side Switch With one touch of the side switch, functions that have been previously established become functional(right click by default). · You can change the position of the screen pointer by moving the tip of the pen. · By varying the amount of pressure applied, the boldness of lines and the size of points can be adjusted. How to hold and place the Pen Hold the pen as you would a pencil. Make sure the side switch is in a convenient location where you can press it with your thumb or forefinger, but won't accidentally press it while drawing. When the pen is not in use and it is left on the tablets active area, nonBizTablet input devices such as mice cannot be used. Therefore, when not in use, the pen should be placed somewhere other than on the tablets active area. Tablet Active Area The area where the pen is used is called the active area, and the screen where the manipulations of the pen are displayed is called the display area. Default Settings *The active area and the display area are set up on a 1:1 scale. *The entire work screen is set up as a work area. The functional settings of the work screen may be changed. For details, please refer to "Using the Control Panel" Page12 Moving the Pointer By raising the pen a little above the tablet and moving it, you can move the position of the screen pointer. To select an icon or folder on the screen, move the pen tip while watching the screen and position the pointer over the desired item. Clicking Tap on the tablet lightly once with the tip of the pen to click. Double-clicking Tap in the same place twice quickly with the tip of the pen to double-click. The settings of the side switch and second side switch may be changed. A portion of the tablet area is mapped. Click Set. . . to open a dialog box where you can set the portion of tablet area. 2 Scaling 3 Tablet area Portion: 4 Default Returns settings to their factory defaults. Portion of screen area The tracking options in the Pen mode details dialog box allow you to define which portion of the display screen your tablet will map. Portion of tablet area The tracking options in the Pen mode details dialog box allow you to define the tablet area that will be mapped to the screen area. Tablet tab To change the settings of the Function Keys, you can click tablet tab of the properties of pen tablet. Troubleshooting If you encounter problems with Biz Tablet, refer to the following tablets. Your problem may be described here, and you can try the solution offered. Problem The pen nib produces a click even when only very lightly coming in contact with the tablet. The pen does not produce a click unless excessive pressure is used. [. . . ] Follow the prompts in the dialog box and install the product. Ideal for Use with PowerPoint Presentations JustShow During presentations, use a pen to make notes and other marks directly in the slide, creating altogether persuasive presentations. It can also be used during conferences as a white board. When you start up PowerPoint, the JustOffice tool bar appears. Emphasize Key Points and Add Supplemental Notes in Slide Shows Click on the JustShow button and the slide show begins. Move the pointer into the upper portion of the slide and the JustShow tool bar appears. [. . . ]