User manual WACOM DTF-720

[. . . ] www. wacom. com DTF-720 interactive pen display Installation Guide & User's Manual Wacom DTF-720 interactive pen display Installation Guide & User's Manual English version 1. 0, August 12, 2005 Copyright WACOM Company, Limited, 2005 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. [. . . ] · Use the + or ­ buttons to adjust the option settings. · After making your changes, press the ENTER button to save. Note: All settings are automatically saved when the OSD menu closes. If you make changes to the display appearance and cannot return to the original settings, use the RESET RECALL option to return the DTF-720 to its original factory defaults. Customizing Page 24 When you open the On Screen Display, the following menu option icons are displayed: CONTRAST. Select to increase or decrease image contrast. BRIGHTNESS. Select to increase or decrease image brightness. PHASE. Select to reduce or eliminate horizontal distortion lines. To automatically adjust, use the RESET option. PITCH. Select to reduce or eliminate vertical distortion lines. To automatically adjust, use the RESET option. HORIZONTAL CENTER. Select to move the screen image left or right. To automatically adjust, use the RESET option. VERTICAL CENTER. Select to move the screen image up or down. To automatically adjust, use the RESET option. MENU POSITION. Select to move the OSD menu around the display screen. RESET. Provides two options: Use AUTO ADJUST to reset only the image parameters. Use RECALL to reset all screen options to the factory default. Selecting the EXIT icon exits the RESET window without resetting anything. Select to increase or decrease the backlight brightness level. LANGUAGE. Select to choose a language option for the OSD. COLOR. Provides color temperature settings for 9300°, 6500°, and 5000° Kelvin. DIRECT displays the received signal as it is without any adjustment. [. . . ] Upon discovery of a defect in the product, except in the Software, within the Warranty Period, you should contact Wacom Technical Support via telephone, email, or fax to obtain an RMA (Return Merchandise Authorization) number and instructions for shipping the product to a service location designated by Wacom. You should send the product, shipping charges prepaid, to the designated service location, accompanied by the return authorization number, your name, address and telephone number, proof of purchase date, and a description of the defect. Wacom will pay for return shipping by United Parcel Service or by an equivalent service as chosen by Wacom. Wacom's sole obligation and entire liability under this warranty shall be, at Wacom's option, either the repair or replacement of the defective product or parts thereof of which Wacom is notified during the Warranty Period; provided, however, that you are responsible for (i) the cost of transportation of the product to the designated service location and (ii) any loss or damage to the product resulting from such transportation. [. . . ]