Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual WAGNER PAINTMATE PLUS. We hope that this WAGNER PAINTMATE PLUS user guide will be useful to you.
Lastmanuals help download the user guide WAGNER PAINTMATE PLUS.
Detailed instructions for use are in the User's Guide.
[. . . ] Pull the plunger to draw the paint into the main tube. NOTE: If the plunger does not move easily, twist it slightly to free it from sticking. NOTE: Make sure to press down firmly on the main tube to make sure the PaintMate® Plus fills properly. [. . . ] NOTE: Make sure your floors and furnishings are protected from dripping paint when removing or disassembling the roller assembly. NOTE: These steps should be followed for cleanup of latex paints ONLY. Remove fill tube from lid and install it into the fill valve housing. Submerge the fill tube into warm, soapy water and pull the plunger in and out a minimum of 5 times. Submerge the connecting area and valve housing under the solvent and pull the plunger in and out five a minimum of 5 times. Drain all excess fluid and clean remaining parts by hand. NOTE: When storing your PaintMate® Plus, make sure the fill valve is pointing downward, and never store your unit with the fill tube inserted into the fill valve. Turn the locking collar next to the trigger counterclockwise until the main tube easily slides off the plunger. Remove the fill tube, then submerge the fill valve and the roller arm and pull the plunger in and out a minimum of 5 times. Submerge the connecting area and the fill valve under warm, soapy water and pull the plunger in and out a minimum of 5 times. Thoroughly pack a generous amount of petroleum jelly around and in between the O-rings on the plunger. NOTE: These steps should be followed for cleanup of oil-based paints ONLY. Remove fill tube from lid and install it into the fill valve housing. Submerge fill tube into a gallon can of mineral spirits and pull plunger in and out a minimum of 5 times. [. . . ] * Denotes parts that can only be purchased together and not individually. 0284051 Accessories can be purchased by calling customer service. This product, manufactured by Wagner Spray Tech Corporation (Wagner) is warranted against defects in material and workmanship for two years following date of purchase if operated in accordance with Wagner's printed recommendations and instructions. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE WAGNER PAINTMATE PLUS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual WAGNER PAINTMATE PLUS will begin.
