User manual WEED EATER 1000E

[. . . ] ENGLISH R Trademark Please do not return unit to retailer. Por favor, no devuelva el aparato al lugar de compra. Veuillez ne pas retourner l'outil au détaillant. 1-800-554-6723 www. weedeater. com Instruction Manual Manual de Instrucciones Manuel d'Instructions 1000E ESPAÑOL WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Failure to do so can result in serious injury. [. . . ] Failure to have the unit repaired by your authorized service dealer can cause the double insulation construction to become ineffective and result in serious injury. WARNING: Disconnect powerhead spark plug (or disconnect powerhead from power source) before performing maintenance. Make sure all fasteners are in place and securely fastened. 3 WARNING: Inspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, string, etc. ) which can be thrown by the blade or can wrap around the shaft. S Keep others including children, animals, bystanders, and helpers at least 50 feet (15 meters) away. Stop the unit immediately if you are approached. Do not overreach or stand on unstable surfaces. S Always keep the wheel in contact with the ground. S Keep all parts of your body away from the blade and muffler. S Always push the unit slowly over the ground. Stay alert for uneven sidewalks, holes in the terrain, large roots, etc. Use only for jobs explained in this manual. S To reduce the risk of fire, do not allow excessive grass, leaves, or grease to accumulate on the attachment. S Objects struck by the cutting member can cause serious injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to edging. S Never operate without blade shield in place. Thrown Objects Safety Glasses Boots WARNING: Blades can throw objects violently . D Wear safety glasses and boots. WARNING: Hazard zone for thrown objects . D Keep people and animals 50 feet (15 m) away. Blades move momentarily after the trigger is released. Allow blades to stop before removing them from the cut. WARNING: Blades move momentarily after the trigger is released. D The blades can seriously cut you or others. [. . . ] To remove the blade, push in locking lever and hold. 5. 9. Blade Blade nut Shaft Install new blade onto blade shaft. If the blade binds against the shield, or appears to be uneven, the blade is not centered, and you must reinstall. 8 STORAGE steps after each use: S Allow attachment and gearbox to cool before storing or transporting. S Store attachment with blade shield in place. [. . . ]