User manual WEED EATER HT1700 HT

[. . . ] ENGLISH R Trademark Please do not return unit to retailer. Por favor, no devuelva el aparato al lugar de compra. Veuillez ne pas retourner l'outil au détaillant. 1-800-554-6723 www. weedeater. com Instruction Manual Manual de Instrucciones Manuel d'Instructions ESPAÑOL HT1700 - 120 V, 60 Hz, 2. 4 A HT2400 - 120 V, 60 Hz, 2. 8 A WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Read instructions carefully before assembling. [. . . ] Do not expose to snow, rain, or water to avoid the possibility of electrical shock. S Use a voltage supply as shown on unit. Do not use in the presence of flammable liquids or gases to avoid creating a fire or explosion and/or causing damage to unit. S To reduce the risk of electrical shock, this equipment has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. The appliance plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If plug does not fit fully into the wall outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way. S To avoid the possibility of electric shock, avoid body contact with any grounded conductor, such as metal fences or pipes. S Inspect hedge trimmer cord periodically and if damaged, have it repaired by an authorized service dealer S Ground Fault Circuit Interrupter (GFCI) protection should be provided on circuit or outlet to be used. Receptacles are available having built-in GFCI protection and may be used for this measure of safety. UNIT SAFETY 4 S Inspect unit before use. Damaged parts must be repaired or replaced by your authorized service dealer. S Inspect entire unit, including blade and handguard, before each use. Have damaged parts repaired or replaced by your authorized service dealer. Make sure all handles, guards, and fasteners are in place and securely fastened. S Do not repair unit yourself. S Before using the unit, have your service dealer replace blades or parts that are cracked, chipped, broken, or damaged in any other way. S Use only WEED EATER blades and other replacement parts and accessories as recommended. TRANSPORTING AND STORAGE S Keep the blades and air vents clean and free of debris to avoid overheating the motor. Clean after each use. CUTTING SAFETY WARNING: Inspect area to be trimmed before each use. Remove objects (rocks, broken glass, nails, wire, string, etc. ) which can be wrap around or be thrown by blades or otherwise cause injury or damage during operation. [. . . ] S Trigger Switch - Ensure switch functions properly by pressing and releasing the trigger switch. S Pigtail plug and extension cord - Discontinue use of unit if pigtail cord becomes damaged. Have damaged cords replaced by your authorized service dealer. AFTER EACH USE INSPECT AND CLEAN UNIT AND LABELS 7 S After each use, inspect complete unit for loose or damaged parts. Clean the unit using a damp cloth with a mild detergent. S Use a soft brush to remove debris from all air intakes and the cutting blade. LUBRICATE BLADES S Stop the motor and disconnect the unit from the power source. [. . . ]