User manual WEED EATER RT10

[. . . ] ENGLISH R Trademark Please do not return unit to retailer. Por favor, no devuelva el aparato al lugar de compra. Veuillez ne pas retourner l'outil au détaillant. 1-800-554-6723 www. weedeater. com Operator's Manual Manual del Operador Manuel de l'utilisateur ESPAÑOL RT10 WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Read instructions carefully before assembling. [. . . ] S To avoid the possibility of electric shock, avoid body contact with any grounded conductor, such as metal fences or pipes. S Ground Fault Circuit Interrupter (GFCI) protection should be provided on circuit or outlet to be used. Receptacles are available having built-in GFCI protection and may be used for this measure of safety. Make sure all handles, guards, and fasteners are in place and securely fastened. Parts that are damaged must be repaired or replaced by a authorized service dealer. These include head parts that are cracked, or chipped, guards, and any other part that is damaged. (1. 65 mm) diameCORD). ter recommended trimmer line (see SERVICE AND ADJUSTMENTS). Make sure spool is properly installed and all parts are securely fastened. S Use only Weed Eaterr replacement parts and accessories as recommended. CUTTING SAFETY S Inspect area to be cut. Remove objects (rocks, broken glass, nails, wire, string, etc. ) which can be thrown or become entangled in cutting head. S Do not overreach or stand on unstable support. S Keep the cutting head below waist level. Cutting head can come dangerously close to your body. S Keep away from cutting head and spinning line. Use only for trimming, scalping, and mowing. It will do the job better and with less risk of injury at the rate for which it was designed. S Use only in daylight or in good artificial light. MAINTENANCE SAFETY WARNING: Disconnect unit from the power supply before performing maintenance, or when changing trimmer line. S Maintain unit according to recommended procedures. Follow instructions for changing trimmer line. S Have all service and maintenance not explained in this manual performed by an authorized service dealer to avoid creating a hazard. [. . . ] Various adjustments will need to be made periodically to properly maintain your unit. BEFORE EACH USE CHECK FOR LOOSE FASTENERS AND PARTS S Housing Screws S Assist Handle S Debris Shield CHECK FOR DAMAGED OR WORN PARTS Contact an authorized service dealer for replacement of damaged or worn parts. S Push the line into the notch, leaving 3 to 5 inches (7 -- 12 cm) unwound. S Insert the line into the exit hole in the hub as shown in the illustration. Line in Notch ACCESSORIES AVAILABLE Safety Glasses 952701645 Spool with 30! [. . . ]