User manual WESTERN DIGITAL USB 2.0 EXTERNAL HARD DRIVE QUICK INSTALL GUIDE

[. . . ] Plug the power connector into the power supply socket located on the back of the drive. Connect the power cord (with the AC power supply connected) into an electrical outlet. Connect one end of the USB 2. 0 cable (included in the kit) into an available USB port on your computer. Plug the other end of the USB 2. 0 cable into the back of the external hard drive. [. . . ] Mac OS X v10. X IMPORTANT: USB 2. 0 support is available on Mac OS X v10. 2 (Jaguar) and later. A USB 2. 0 PCI adapter card/built-in USB 2. 0 host and USB 2. 0 certified cable are required to obtain Hi-Speed USB performance. If your drive is larger than 128 GB, you must reinitialize the drive using Apple's Disk Utility as Macintosh systems do not have 48-bit addressing support for FAT32 volumes larger than 128 GB. If your drive is less than 128 GB, this procedure is not necessary, although reinitializing in Mac OS is recommended for the highest performance and reliability. USB 2. 0 External Hard Drive Rear and Front Panel with Installation continued on reverse a. To reinitialize the drive, select Applications > Utilities > Disk Utility. Select your new drive and click on the Erase tab from the top menu. The following window displays: Warranty Information (U. S. A. ) Obtaining Service Western Digital (WD) values your business and always attempts to provide you the very best of service. If this Product requires maintenance, either contact the dealer from whom you originally purchased the Product or visit our product support Web site at support. wdc. com for information on how to obtain service or a Return Material Authorization (RMA). If it is determined that the Product may be defective, you will be given an RMA number and instructions for Product return. An unauthorized return (i. e. , one for which an RMA number has not been issued) will be returned to you at your expense. Authorized returns must be shipped in an approved shipping container, prepaid and insured, to the address provided on your return paperwork. Your original box and packaging materials should be kept for storing or shipping your Western Digital hard drive. To conclusively establish the period of warranty, check the warranty expiration (serial number required) via support. wdc. com. WD shall have no liability for lost data, regardless of the cause, recovery of lost data, or data contained in any Product placed in its possession. 1 Year Limited Warranty WD warrants that the Product, in the course of its normal use, will be free from defects in material and workmanship for a period of one (1) year and will conform to WD's specification therefor. This limited warranty period shall commence on the purchase date appearing on your purchase receipt. WD shall have no liability for any Product returned if WD determines that the Product was stolen from WD or that the asserted defect a) is not present, b) cannot reasonably be rectified because of damage occurring before WD receives the Product, or c) is attributable to misuse, improper installation, alteration (including removing or obliterating labels), accident or mishandling while in your possession. Subject to the limitations specified above, your sole and exclusive warranty shall be, during the period of warranty specified above and at WD's option, the repair or replacement of the Product. The foregoing warranty of WD shall extend to repaired or replaced Products for the balance of the applicable period of the original warranty or ninety (90) days from the date of shipment of a repaired or replaced Product, whichever is longer. The foregoing limited warranty is WD's sole warranty and is applicable only to products sold as new. The remedies provided herein are in lieu of a) any and all other remedies and warranties, whether expressed, implied or statutory, including but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and b) any and all obligations and liabilities of WD for damages including, but not limited to accidental, consequential, or special damages, or any financial loss, lost profits or expenses, or lost data arising out of or in connection with the purchase, use or performance of the Product, even if WD has been advised of the possibility of such damages. In the United States, some states do not allow exclusion or limitations of incidental or consequential damages, so the limitations above may not apply to you. [. . . ] The 30-day period commences on the date of your first telephone contact with Western Digital technical support. Take advantage of Western Digital special offers and product updates by registering your USB 2. 0 external hard drive online at https://www. wdc. com/en/products/registration. Regulatory Compliance FCC Class B Information This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. [. . . ]