User manual WESTINGHOUSE MT10 FLIP INSTALL GUIDE

[. . . ] Installation & Assembly - Under Cabinet Swivel Mount for LCD TVs This product is intended for use with 10" to 15" LCD TVs weighing up to 10 lb and VESA® 75 and VESA® 100 mounting patterens Model: MT10 FLIP Max Load 10 lb (4. 5 kg) IMPORTANT!Read entire instruction sheet before you start assembly and installation. Important, read before installation: In order to locate the mount completely under the cabinet, the cabinet depth should be at least 1. 5" more than the height of the TV. [. . . ] Place 1/4 split washer (L) on M5 screw (K) before #10 SAE washer (I) and fasten adapter plate (B) to LCD assembly (A) as shown in figure 2. Round Cover A I L K figure 1 B figure 2 Sample location: your screen may mount in a different location in the slot. Carefully hold the closed mount with the TV against the bottom of your cabinet. Make sure that there is enough clearance between the back of the TV and the wall to clear the back tab. Drill four 1/4" holes to match the drawing to the right. Back holes of A 6. 00" CAUTION · We recommend taking the screen off the mount to affix the bracket to the cabinet, to avoid any damages to the screen. Fasten LCD Assembly (A) to cabinet using four 10-32 x 1. 25" screws (D) four #10 SAE washers (I) and four 1/4" spacers (E). Get all four screws (D) started before tightening. Note: If cabinet underside has lip, use four 7/8" spacers (G) and four 10-32 x 2" screws (F) instead of screws (D) and spacers (E). This lowers LCD Assembly (A) by 7/8" to allow LCD Assembly (A) to open and close without obstruction. LCD assembly Back Tab 1. 25" Wall TOP VIEW I D or F E or G 3 of 5 Visit the Westinghouse Web Site at www. westinghousedigital. com ISSUED: 04-16-04 SHEET #: 090-9101-1 For customer service call 1-866-287-5555. Reattach screen onto bracket using the same position determined in step 4. Wind helical wrap (J) around all cords from back of LCD TV, as shown. Place cord clips (H) as needed, to better manage cords, making sure that one clip is close enough to the hinge area to prevent cord from bunching up. Note: Make sure that cords come out right side of LCD assembly (A). H Right Side A J Place cord cover back onto LCD assembly (A), so that it is even with the bends on the side of the mount. Note: Make sure all slack is pulled out with mount fully open before replacing cord cover. Cord Cover 4 of 5 Visit the Westinghouse Web Site at www. westinghousedigital. com ISSUED: 04-16-04 SHEET #: 090-9101-1 For customer service call 1-866-287-5555. Limited Five-Year Warranty Westinghouse Digital Electronics warrants to original end-users of this Westinghouse television mounting product (the "Product") that the Product will be free from defects in material and workmanship, under normal use, for a period of five (5) years from the date of purchase by the original end-user, subject to the following terms and conditions: REPAIR OR REPLACEMENT ­ For a period of five (5) years from the original date of purchase, Westinghouse Digital Electronics will repair any defect in material or workmanship in the Product, or, at its option, replace a defective Product. Replacement parts and products will be warranted for either the remainder of the original warranty period or ninety (90) days from the date of delivery to the end-user, whichever occurs last. OBTAINING WARRANTY SERVICE ­ To obtain warranty services, you must either personally deliver or ship the Product to Westinghouse Digital Electronics, freight prepaid. Please call Westinghouse Digital Electronics at (866) 287-5555 to obtain a Return Merchandise Authorization ("RMA") and for other instructions regarding return and replacement or repair of the Product. Westinghouse Digital Electronics will not accept Products delivered to it without an RMA. [. . . ] This warranty gives specific legal rights, and you may also have other rights which vary from State to State. Westinghouse Digital Electronics, LLC 16257 East Gale Ave. City of Industry, California 91745 Tel: (626) 333-9677. 5 of 5 Visit the Westinghouse Web Site at www. westinghousedigital. com ISSUED: 04-16-04 SHEET #: 090-9101-1 For customer service call 1-866-287-5555. and Westinghouse are trademarks of Westinghouse Electric Corporation and are used under license. [. . . ]