User manual WESTINGHOUSE SB926SK

[. . . ] 117994710 10042007. qxp 4/10/2007 3:04 PM Pagina 1 user manual Dishwasher SB926 117994710 10042007. qxp 4/10/2007 3:04 PM Pagina 2 2 The Thoughtful Design Innovator The Thoughtful Design Innovator. Do you remember the last time you opened a gift that made you say "Oh!That's exactly what I wanted!" That's the kind of feeling that the designers at Electrolux seek to evoke in everyone who chooses or uses one of our products. We devote time, knowledge, and a great deal of thought to anticipating and creating the kind of appliances that our customers really need and want. [. . . ] Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. 117994710 10042007. qxp 4/10/2007 3:04 PM Pagina 20 20 washing programmes Washing programmes Program Degree of soil Any Type of load Partial load (to be completed later in the day). Crockery and cutlery Program description 1 cold rinse (to avoid food scraps from sticking together). This program does not require the use of detergent. RINSE FAST_30 60° (2) Light soil Main wash up to 60°C Final rinse Prewash Main wash up to 50°C Final rinse Drying NORMAL ECO (3) Normal soil Crockery and cutlery HEAVY 70° Heavy soil Crockery, cutlery, pots and pans Crockery, cutlery, pots and pans Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying Prewash Main wash up to 50°C or 65°C 2 intermediate rinses Final rinse Drying SENSOR (1) Any 117994710 10042007. qxp 4/10/2007 3:04 PM Pagina 21 washing programmes 21 Washing programmes information (1) During the "SENSOR" washing program the amount of soil on the dishes is determined by how cloudy the water is. The program duration, water and energy consumption levels can vary, this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily solied. The temperature of the water is automatically adjusted between 50°C and 65°C. (2) Ideal for washing a partially loaded dishwasher. This is the perfect daily program, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutley. (3) The "NORMAL ECO" program is recommended to wash a full 12 place setting load of normally soiled dishes. Because it runs at a lower temperature, it is not suitable for heavily soiled wash loads. To save energy, dry performance is reduced so you may have to open the door at the end of the wash cycle or even towel dry some dishes. 117994710 10042007. qxp 4/10/2007 3:04 PM Pagina 22 22 care and cleaning Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. Dirty filters will degrade the washing result. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B). Clean all filters thoroughly under running water. Remove the flat filter from the base of the washing compartment and clean both faces thoroughly. Before cleaning the filters ensure that the machine is switched off. The dishwasher filter system comprises a coarse filter (A), a microfilter (B) and a flat filter. Unlock the filter system using the handle on the microfilter, and remove. 7. Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly. Place the coarse filter (A) in the microfilter (B) and press together. Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment. 3. Turn the handle about 1/4 a turn anticlockwise and remove. NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results and may result in damage to the appliance. 117994710 10042007. qxp 4/10/2007 3:04 PM Pagina 23 care and cleaning 23 NEVER try to remove the spray arms. [. . . ] If you are outside an Electrolux service area, you will bear these costs. For information about whether you are within an Electrolux service area, please phone 13 13 49 in Australia, or 0800 10 66 10 in New Zealand. Proof of purchase is required before you can make a claim under this warranty. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship. [. . . ]