User manual WHIRLPOOL 20BI-L4L/A PRODUCT FICHE

[. . . ] Installation and the electrical connection must be carried out by a qualified technician, according to the manufacturer’s instructions and local safety regulations. Clean the inside of the appliance before using it. SAFEGUARDING THE ENVIRONMENT 1. Packing The packing material is 100% recyclable and bears the recycling symbol. For disposal, comply with the local regulations. [. . . ] The selected temperature will start flashing and then come on permanently, within 5 seconds, on the display. Ice on-off To switch the ice maker on press the ice on-off button until one of the two icons comes on: deactivate the function, repeat the procedure until both icons go off. . To Ice mode This function enables to select the type of ice desired: crushed ice or ice cubes information refer to the section “Using the ice and water dispenser” section. . For further Ice and water dispenser light The light can be switched on and off by pressing the light button on the control panel or pressing one of the two dispenser levers; the light will switch off automatically once the water or ice has been dispensed. 11 501931502021_GB 22-06-2007 8:31 Pagina 12 USING THE APPLIANCE ALARMS The alarm icon is connected with the acoustic signal. Important: To disable the acoustic signal, press the OK button. Black-out alarm The alarm black-out activates when a prolonged interruption of the power supply has caused an increase in temperature in the freezer compartment. The freezer display will flash, showing the maximum temperature reached in the compartment during the interruption and the acoustic signal will come on. Important: Before consuming any food from the compartment ensure that this is still suitable for consumption. Door open alarm The door alarm symbol lights up and the acoustic alarm is activated when one or both doors of the refrigerator and/or freezer have remained open. When the doors are left open for more than 2 minutes, the symbol flashes and an acoustic signal sounds. Operation alarm This symbol, with the activation of the acoustic signal and the appearance of letters on the display, indicates that there is a problem with the appliance. You will be asked to provide the letter code shown on the display instead of the temperature. 12 501931502021_GB 22-06-2007 8:31 Pagina 13 USING THE APPLIANCE OPERATION SYMBOLS 6th Sense * Function The icon on indicates that the appliances is in the process of reaching the optimum preservation conditions This function will activate automatically when: • A particularly high quantity of food to be cooled and/or frozen has been placed inside the appliance. • The refrigerator and/or freezer door has been left open for a long time. • There has been an extended interruption of the power supply. The icon remains on until optimum preservation conditions are reached. “Listeria” thermometer indicator (in some models only) This symbol enables the user to check that the temperature of the refrigerator is suitable to guarantee the correct preservation of the food. The function is set by pressing the ice mode and the light buttons at the same time for 3 seconds: the symbol will come on and an acoustic signal will activate. To deactivate the function, carry out the same procedure until the symbol goes off. Note: This function does not disconnect the power to the appliance, ice-maker or light, but simply deactivates the dispenser levers. Fast freezing (freezer) This function must be activated before freezing fresh food. To activate the function press the menu button until the fast freezing symbol appears on the left of the display. The symbol starts flashing and the freezer door icon comes on. The function will automatically deactivate after 24 hours. It can also be deactivated manually at any time by repeating the procedure. Fast cooling (refrigerator) This function is used to speed up the cooling process for fresh foods. This function is activated by pressing the menu button until the fast cooling symbol appears on the right of the display. The symbol starts flashing and the refrigerator door icon comes on. [. . . ] Wait about 3 minutes for the dispenser motor to reset. If the ice has an unpleasant smell or taste: • Has the ice absorbed bad odours?Water containing minerals may require a filter. • Is the ice bucket/freezer compartment clean? [. . . ]