User manual WHIRLPOOL 20RA-D3 A SF INSTALLATION

[. . . ] To reset the function, carry out the same procedure until the previously set temperatures are displayed. Note: Remember that this operation does not disconnect the appliance from the power supply. Freezer temperature The factory-set ideal temperature is -18°C. To change the temperature, press the display shows the required value. [. . . ] Refrigerator temperature The factory-set ideal temperature is +5°C. To change the temperature, press the displayed. buttons until the buttons until reaching the required value that it will be On/off Use the on/off button to switch the ice maker on or off. When the ice maker is on, the display shows one of the two icons. Mode Press the mode button to select the type of ice desired: crushed or cubes . 9 Ice and water dispenser light The light can be switched on and off by pressing the button on the control panel or pressing one of the two dispenser levers; the light will switch off automatically once the water or ice has been dispensed. 6th Sense Function The icon on indicates that the appliances is in the process of reaching the optimum preservation conditions This function will activate automatically when: • A particularly high quantity of food to be cooled and/or frozen has been placed inside the appliance. • The refrigerator and/or freezer door has been left open for a long time. • There has been an extended interruption of the power supply. The icon remains on until optimum preservation conditions are reached. “Listeria" thermometer indicator (in some models only) This symbol enables the user to check that the temperature of the refrigerator is suitable to guarantee the correct preservation of the food. If the indicator is on, and the appliance has been in operation for at least 24 hours, the temperature inside the refrigerator compartment is correct. If this is not the case, reduce the set temperature and wait 12 hours, before carrying out a new visual check of the indicator. To activate the function, press the button until the fast freeze symbol appears. The function is automatically deactivated after 24 hours, or manually by pressing again the button. Vacation This function deactivates the refrigerator compartment if the user is going away for sometime. This function can be activated or deactivated by pressing the button: The relevant icon will come on and the displayed temperature of the refrigerator compartment will be replaced by a dash. To reactivate the refrigerator compartment, repeat the operation. After activating the function, remove perishable food from the refrigerator compartment and keep the door closed, since the refrigerator maintains an adequate temperature for preventing the formation of odours. Eco Mode This optional function can be used to save energy. It is important to remember that this function does not disconnect the appliance from the power supply. To activate the function press and hold down the “+” and “–” keys of the refrigerator compartment for 5 seconds, until the display switches off completely. When trying to use the control panel (opening doors or using the water and/or ice delivery control levers) while this function is on, the display will show the message ECO to warn the user of the current operating condition. The ECO function disables the control panel and its warning signals. [. . . ] The ECO function disables the control panel and its warning signals. To reinstate normal operating condition repeat the same operation until the display shows the previously set temperatures. ALARMS In the event of an alarm, the acoustic alarm and indicator lights are activated. Important: To disable the acoustic signal, press the Alarm Reset button. [. . . ]