User manual WHIRLPOOL 20TI-L4 A INSTALLATION

[. . . ] To reset the function, carry out the same procedure until the previously set temperatures are displayed. Note: Remember that this operation does not disconnect the appliance from the power supply. Freezer temperature The factory-set ideal temperature is -18°C. To change the temperature press the freezer temp button until the desired value is reached. [. . . ] • There has been an extended interruption of the power supply. The icon remains on until optimum preservation conditions are reached. “Listeria" thermometer indicator (in some models only) This symbol enables the user to check that the temperature of the refrigerator is suitable to guarantee the correct preservation of the food. If the indicator is on, and the appliance has been in operation for at least 24 hours, the temperature inside the refrigerator compartment is correct. If this is not the case, reduce the set temperature and wait 12 hours, before carrying out a new visual check of the indicator. Antibacterial filter (depending on model) This symbol shows the condition of the antibacterial filter. When switching on the appliance for first use, the filter icon shows three dashes. In time their number will decrease, depending on the use of the appliance and the natural wear of the filter charge itself. When all the dashes disappear and the icon starts flashing, the filter needs replacing. Replace the cartridge and press the OK button until the three dashes reappear on the display. 00800-40088400 - www. whirlpool. eu/myfridge. The function will automatically deactivate after 24 hours. It can also be deactivated manually at any time by repeating the procedure. Fast cooling (refrigerator) This function is used to speed up the cooling process for fresh foods. This function is activated by pressing the menu button until the fast cooling symbol appears on the right of the display. The symbol starts flashing and the refrigerator door icon comes on. Press OK to confirm The function will automatically deactivate after 6 hours. It can also be deactivated manually at any time, by repeating the procedure. Vacation This function deactivates the refrigerator compartment if the user is going away for sometime. This function is activated by pressing the menu button until the vacation symbol appears. The symbol flashes and the refrigerator compartment temperature disappears from the display. To reactivate the refrigerator compartment, repeat the operation. [. . . ] Keep both buttons pressed for approximately 5 seconds until the display goes off completely. When trying to use the control panel (opening doors or using the water and/or ice delivery control levers) while this function is on, the display will show the message ECO to warn the user of the current operating condition. The ECO function disables the control panel and its warning signals. To reinstate normal operating condition repeat the same operation until the display shows the previously set temperatures. [. . . ]