User manual WHIRLPOOL 700 947 31 PROGRAM CHART

[. . . ] • The oven door must be kept closed during the cooking cycle. • When cooking meat, pour a little water into the drip tray (on the bottom level) to reduce smoke and fat spatters. • Ideally the meat should be turned during cooking. • To grill large joints of meat (roast beef and other roast meats). [. . . ] Return to point 3 chapter “Selecting the cooking time”. The time of day appears again on the display. To increase the cooking time, use button “-” or “+”. Selecting the end of cooking time Using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and 59 minutes. Proceed as described in points 1 and 2 chapter “Selecting the cooking time” 2. Press “set” to set the end of cooking time: the indicator next to the symbol lights up. Set the end of cooking time using button “-” or “+”. Press “ok” to confirm the end of cooking time. The oven will turn on automatically at the end of cooking time minus cooking time: the indicators on the display above the symbols will light up. Turn knob  to the function , the indicator lights up next to the symbol . Food warmer This maintains a constant temperature of 80°C in the oven. When the temperature reaches 80°C, the indicator next to turns off, an acoustic signal is heard and an operating time of 5 minutes (preset by the manufacturer) blinks on the display. To change the preset time, use button “+” or “-”. Once the set time has elapsed, the oven switches off, an acoustic signal is heard and appears on the display. Pizza This operates at a fixed temperature of 250°C and is ideal for baking pizzas. When the temperature reaches 250°C, the indicator next to turns off, an acoustic signal is heard and an operating time of 12 minutes (preset by the manufacturer) blinks on the display. To change the preset time, use button “+” or “-”. Once the set time has elapsed, the oven switches off, an acoustic signal is heard and appears on the display. Starting the oven When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates “12. 00”. Selecting and changing the clock time: 1. Press button “-” or “+” to set the hour. Press “ok” and “-” or “+” to set the minutes. To change the time: Press and hold “ok” for 2 seconds until the time flashes on the display. [. . . ] Use buttons“-” or “+” to set the desired time. Press “ok” to confirm the selection. Once the set time has elapsed: An acoustic signal sounds and flashes on the display. Press “ok”: The acoustic signal stops. [. . . ]