User manual WHIRLPOOL 8542748-D-WH

[. . . ] ® 24" Electric Washer/Dryer OVERALL DIMENSIONS PRODUCT MODEL NUMBER LTE5243D Electrical: A 120/240-volt, 60-Hz, AC-only, electrical supply (120/208-volt electrical supply, if specified on the serial/rating plate) is required on a separate 30-amp circuit, fused on both sides of the line. [. . . ] (14 cm) clearance behind the dryer for the exhaust vent with elbow. * EXHAUST VENTING Plan installation to use the fewest number of elbows and turns. Maximum length of the exhaust system depends upon the type of vent used, number of elbows and the type of exhaust hood. The maximum length for both rigid and flexible vent is shown in the chart. 2 4" (10. 2 cm) RECESSED AREA AND CLOSET INSTALLATION Additional clearance for wall, door and floor molding may be required. when house exhaust system is lined up directly with dryer exhaust. A B 0" (0 cm) 48 in. 2 (310 cm2) C 3" (7. 6 cm) 1 4" (10. 2 cm) 4" (10. 2 cm) (6. 4 cm) 24 in. 2 (155 cm2) 3" (7. 6 cm) 0" (0 cm) 23 7/8" (60. 64 cm) 0" (0 cm) 1" 27 1/4" (2. 5 cm) (69. 22 cm) 51/2" (14 cm) Angled hood style 1. Box hood style Vent Length Chart Number of 90 turns or elbows 0 Type of Vent Box or Louvered hoods 43 ft (13. 1 m) 30 ft (9. 1 m) 33 ft (10. 1 m) 24 ft (7. 3 m) 24 ft (7. 3 m) 16 ft (4. 9 m) Angled hoods 36 ft (11. 0 m) 24 ft (7. 3 m) 26 ft (7. 9 m) 18 ft (5. 5 m) 16 ft (4. 9 m) 10 ft (3. 0 m) A. Closet door with vents Rigid metal Flexible metal Rigid metal Flexible metal Rigid metal Flexible metal 1 2 NOTE: Side exhaust adds a 90° turn inside the washer/dryer. [. . . ] Specifications subject to change without notice. Ref. [. . . ]