User manual WHIRLPOOL 8562591-D-WH

[. . . ] ® 24" Gas Washer/Dryer OVERALL DIMENSIONS PRODUCT MODEL NUMBER LTG5243D Gas supply: Dryer is equipped for use with NATURAL gas. When rigid pipe is used it should be 1/2 inch IPS. [. . . ] Rigid or flexible metal exhaust vent must be used. Exhaust outlet hood must be at least 12 inches from the ground or any object that may be in the path of the exhaust. The dryer can be converted to exhaust out right or left side. EXHAUST VENTING Plan installation to use the fewest number of elbows and turns. Maximum length of the exhaust system depends upon the type of vent used, number of elbows and the type of exhaust hood. The maximum length for both rigid and flexible vent is shown in the chart. 2 B 4" (10. 2 cm) * Most installations require a minimum 5-1/2 in. (14 cm) clearance behind the dryer for the exhaust vent with elbow. * RECESSED AREA AND CLOSET INSTALLATION Additional clearance for wall, door and floor molding may be required. when house exhaust system is lined up directly with dryer exhaust. A B 0" (0 cm) 48 in. 2 (310 cm2) C 3" (7. 6 cm) 24 in. 2 (155 cm2) 3" (7. 6 cm) 0" (0 cm) 23 7/8" (60. 64 cm) 0" (0 cm) 1" 27 1/4" (2. 5 cm) (69. 22 cm) 51/2" (14 cm) A 1 4" (10. 2 cm) 4" (10. 2 cm) (6. 4 cm) A. Closet door with vents Angled hood style A. Box hood style Vent Length Chart Number of 90 turns or elbows 0 Type of Vent Box or Louvered hoods 43 ft (13. 1 m) 30 ft (9. 1 m) 33 ft (10. 1 m) 24 ft (7. 3 m) 24 ft (7. 3 m) 16 ft (4. 9 m) Angled hoods 36 ft (11. 0 m) 24 ft (7. 3 m) 26 ft (7. 9 m) 18 ft (5. 5 m) 16 ft (4. 9 m) 10 ft (3. 0 m) DRAIN SYSTEM Standpipe drain system - wall or floor The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum carry-away capacity can be no less than 17 gal. A 2" (5 cm) diameter to 1" (2. 5 cm) diameter standpipe adapter kit is available. [. . . ] For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Ref. [. . . ]