User manual WHIRLPOOL ACM 847 IX PROGRAM CHART

[. . . ] - The food should be inserted in the oven in its wrapping to prevent it from drying out. STATIC FUNCTION Use when all the food is on the same runner level. - Preheat the oven to the required cooking temperature and place the food inside as soon as the red thermostat indicator light switches off. FAN FUNCTION Use this function when cooking food on more than one level (e. g. : fish, vegetables, pasta). [. . . ] - Turn over the meat about half-way through cooking time. HEAT MAINTENANCE FUNCTION Use this function to keep food warm. Turn the thermostat control knob to 60°C. USING THE OVEN - Turn the function selector knob to the desired position. - Turn the oven thermostat control knob to the desired temperature. To switch the oven off: - Turn the function selector knob to position 0. - Turn the oven thermostat control knob to position 0. PROGRAMMER WITH NUMERICAL CLOCK FUNCTIONS Length of cooking time, end of cooking, manual position, clock, timer, time programmable up to 23 hours and 59 minutes. DISPLAY Fluorescent 4 digit 7 segment display to show the time and cooking time. Use the + and – buttons to select the end of cooking time required. The AUTO and length of cooking time symbols stay on. When the end of cooking time coincides with the time set the relay and the length of cooking symbol switch off. At the end of cooking time the AUTO symbol flashes, the beep sounds and the length of cooking and the relay switch off. AUTOMATIC OPERATION WITH LENGTH AND END OF COOKING Press the length of cooking time button and use the + and – buttons to select the length of cooking time required. The AUTO and length of cooking time symbols stay on. The display shows the nearest end of cooking time. Use the + button to select the end of cooking time required. The relay and the length of cooking time symbol switch off. The symbol lights up again when the time coincides with the start cooking time. At the end of cooking time the AUTO symbol flashes, the beep sounds and the length of cooking and the relay switch off. TIMER Press the timer button and use the + or – button to select the cooking time required. The bell symbol lights up when the timer is operating. At the end of the programmed time the beep sounds and the bell symbol goes out. BEEP The beep sounds at the end of a programming or a timer function and lasts for 15 minutes. [. . . ] This operation cancels previously saved programs and the contacts are switched off. MANUAL OPERATION On pressing the manual button, the relay contacts are switched on, the auto symbol goes out and the pan symbol lights up. Manual operation is only possible at the end of automatic programming or after cancelling it. AUTOMATIC OPERATION On pressing the length of cooking or end of cooking buttons the programmer automatically switches from manual mode to automatic mode. [. . . ]