User manual WHIRLPOOL ACM 926/1 IX INSTRUCTION FOR USE

[. . . ] INSTRUCTIONS FOR USE INSTALLATION INSTRUCTIONS BEFORE USING THE APPLIANCE PRECAUTIONS AND GENERAL ADVICE ENERGY SAVING TIPS OVEN ACCESSORIES CLEANING AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER-SALES SERVICE For best use of the oven, carefully read the operating instructions and keep them for future consultation. 88 INSTALLATION INSTRUCTIONS Electrical connection Before connecting the appliance, make sure: 1. the mains voltage in your home matches that specified on the appliance dataplate; 2. the electrical system adequate for appliance max. power absorption specified on the dataplate; 3. [. . . ] Turn the adjustment screw anticlockwise to increase the flame, or clockwise to decrease it. Adjustment is correct when the flame is approx. The adjustment screw must be completely screwed down for butane/propane gas. Make sure the flame does not go out when switching straight from high to low flame and vice versa. 6 93 BEFORE USING THE APPLIANCE • Remove the accessories from the oven and heat it at 200°C for about two hours to eliminate the smell of protective grease and insulating materials. Keep the window open during this operation. • Before use, remove: - stickers located on the front of the appliance and on the oven door, except the dataplate; - cardboard protection and protective plastic film on the control panel and other parts of the appliance; - any stickers on the accessories (e. g. Packing The packing material is completely recyclable, and is marked with the recycling symbol , which identifies it as a type of material that must be sent to local waste-disposal centres. Product This appliance is marked in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring that this appliance is correctly scrapped, the user can help prevent potentially harmful consequences for the environment and the health of people. The symbol on the appliance or accompanying documentation indicates that this product must not be treated as household waste, but must be taken to a collection centre for the recycling of electrical and electronic appliances. Disposal must be carried out in accordance with the local environmental regulations on waste disposal. For more detailed information about the treatment, recovery and recycling of this product, please contact your competent local authority, the household waste collection service or the shop where you purchased the appliance. 94 PRECAUTIONS AND GENERAL ADVICE • The appliance is designed solely for domestic use for cooking food. The Manufacturer declines all liability for inappropriate use or incorrect setting of the controls. • Any repairs or adjustments must be carried out exclusively by a qualified technician. • Never expose the oven to atmospheric agents. • Do not place heavy objects on the door as they could damage the oven compartment and hinges. • Do not hang anything heavy on the oven door handle. • Do not cover the oven floor with aluminium foil or other objects. • The oven door must close properly. • Do not pour water directly inside a hot oven. The enamel coating could become damaged. [. . . ] NOTE: Proceed in reverse order to refit the door. Make sure the saddle brackets are lowered before closing the oven door. Fig. Disconnect the oven from the power supply. After the oven has cooled down, unscrew (anticlockwise) the lamp cover A (Fig. [. . . ]