User manual WHIRLPOOL ADG 676 NB PROGRAM CHART

[. . . ] To select the “Eco” programme: turn the selector's knob to position 2 and press the Eco button. The dishwasher starts automatically as soon as the On/Off button has been pressed. Only open the dishwasher door if strictly necessary during a wash cycle and exercise maximum caution. The wash programme is over when the selector's knob is back in the Stop position. Upper and lower rack Lower rack Height adjustment must only be carried out with the basket empty: • 5. [. . . ] The wash programme is over when the selector's knob is back in the Stop position. Upper and lower rack Lower rack Height adjustment must only be carried out with the basket empty: • 5. Switch off the dishwasher now by pressing the On/Off button. Open the door (warning: beware of hot steam). Unload the lower rack before the upper one. • Release the caps of the rack rails by pushing them outwards sideways. Take the rack out and re-insert it using either the upper or lower roller pairs as required. Up: plates. Cutlery basket (A): • The cutlery basket can be either inserted or removed to increase available space, as required. If present, the central compartment is recommended for storing teaspoons. 3. Press the On/Off button to switch the dishwasher on. The indicator lamp switches on. • • • Crockery holders: • • Upper rack To change the selected programme, press the On/Off button to turn the dishwasher off and then turn the selector knob to the desired programme (if required, select the optional Eco or Rapid functions by pressing the relevant buttons). (See “Care and Maintenance” chapter in the user instructions). Is the salt container cap (water softening system) screwed down?Is the salt dispenser properly adjusted?(See “Filling the salt container” in the user instructions). (See “Filling the salt container” in the user instructions). (See “Filling the detergent dispenser” in the user instructions). (See “Filling the rinse aid dispenser” in the user instructions). • AFTER-SALES SERVICE If, after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the water supply tap, then call our After-Sales Service (see guarantee). Please specify: • The nature of the fault. • The service code (the number indicated after the word Service on the adhesive rating plate) inside the door on the right-hand side. • • • • • • • • Important • • Fill the detergent dispenser and check the salt and rinse aid level. Do not use the appliance for items not suitable for washing in a dishwasher, for example: wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. [. . . ] • The service code (the number indicated after the word Service on the adhesive rating plate) inside the door on the right-hand side. • • • • • • • • Important • • Fill the detergent dispenser and check the salt and rinse aid level. Do not use the appliance for items not suitable for washing in a dishwasher, for example: wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. Do not put liquid fat in the dishwasher (e. g. If regeneration salt is to be added, immediately start a wash programme in order to eliminate any residual salt (rinsing alone is not sufficient). [. . . ]