User manual WHIRLPOOL ADG 7500/1 PROGRAM CHART

[. . . ] Check the salt and rinse aid level indicators before you start the machine. Use the programme selection button to choose your washing programme. Start the programme with the start / pause button: Close the door then programme starts. Attention Avoid opening the door during the washing process. [. . . ] Load capacity : 10 FUNCTION BUTTONS Function buttons On/off button You turn your dishwasher on / off with this button. When turning on, the indicator light for the last used programme will light up. Start / Pause button You use this button to start the selected programme; the light on the button lights up. Stop the programme with the start / pause button if you would like to open the door once the dishwasher’s washing programme is running. Programme selection buttons Use the programme selection button to select the desired programme. The corresponding programme light lights up. How to cancel the washing programme To cancel a programme while the machine is operating: Press start/stop button. Press start/stop button for 5 seconds again. The indicator light will start flashing. The machine will drain the water inside the machine for 45 seconds. The programme is cancelled when start/stop indicator light goes off. Then, you can choose and start a new programme. Important: Depending on the stage of the programme you have cancelled, there may be detergent residue or rinse aid inside the machine and on the load. Make sure the items in the dishwasher are not used before washing properly. [. . . ] In machines which do not possess an electrical salt indicator, the salt content can be read on the container for the salt. When the visual fill indicator is dark, there is enough salt in the container. When the colour is light, open the container and add dishwasher salt. 3 SALZ S EL TU Z Full S EL Empty Note for Testing Institutes The necessary information for performance testing will be provided upon request. [. . . ]