User manual WHIRLPOOL ADG 8280 IX PROGRAM CHART

[. . . ] Electric indicator on control panel (if provided). Refer to the dishwasher loading instructions. Select, save, and supply the detergent Check the rinse aid level Check the regeneration salt level Load the racks Close the dishwasher door, turn on the water tap Select a programme The last programme selected will light up. Select the desired programme (using the specific button or knob). The corresponding indicator lamp lights up. [. . . ] • The appliance does not load sufficient water. • Open the tap. Remedy • Clean the water supply tap filter. • Ensure there are no kinks in the water hose. • • • • Insert the plug into the mains socket. Check the safety circuit breaker. • Starting the selected programme. • The programme can be set to “0” to start. • Arrange crockery so that items do not touch each other. • Follow recommended detergent dosage. • Select a more intense wash cycle. • The spray arms must be able to turn freely. • Remove any impurities obstructing the water flow *. If crockery is not perfectly dry • Insufficient rinse aid. • Residual water in cavities. If crockery is not perfectly clean • The water jet does not reach the crockery. • Spray arm nozzles clogged. • Incorrect detergent/detergent too old. • Use a good quality detergent. Sandy or grainy residues • Clogged filters. • Filters incorrectly assembled. • Check filters regularly/if necessary clean *. • Depending on the material, if necessary use a detergent with a greater whitening power. Colour of plastic parts faded Deposits on crockery • Removable • Tomato/carrot juice, . . . • Streaks on the crockery/glasses. • Layer of salt on crockery/glasses. • Increase the rinse aid dosage *. • Close the salt container lid properly *. • Change water hardness setting, if necessary add salt *. • Not removable • Insufficient water softening, calcium deposits. Opaque glasses/ glasses • Cannot be washed in the dishwasher. not sparkling Rust on cutlery Identifying appliance faults • Not made of stainless steel. • The START indicator lamp flashes. (if provided). • Use suitable glasses. • Use suitable cutlery. • Ensure the filter assembly is not clogged and that there is no interruption to the water supply (if necessary, clean the filters *). [. . . ] if the door is opened and remains open for a long time), the lamp will start blinking to indicate that sanitation is not guaranteed. Indicators Add regeneration salt Only add regeneration salt immediately before starting a wash programme. Add rinse aid Programme chart Programmes Sensor Normal 5) 40-55°C Detergent 2) Loading instructions A X Consumption 3) Litres kWh Minutes B X Automatic programme recommended for routine washes, with no dried-on or burnt food (not for EN 50242). Automatic programme recommended for 10. 0-13. 0 0. 80-1. 05 60-120 Sensor Intensive 5) 60-70°C heavily soiled crockery with dried-on or burnt food, for example pans and saucepans. X X 13. 0-20. 0 1. 10-2. 00 100-150 Pre-Rinse Glasses Quickwash Bio 1) 5) 6) 1) cold 40°C 40°C 50°C Crockery to be washed later. Light soiling, for example glasses and cups. Lightly soiled crockery with no dried-on food. [. . . ]