User manual WHIRLPOOL ADG 8533/1 FD WP PROGRAM CHART

[. . . ] When cooking meat, pour a little water into the drip tray (on the bottom level) to reduce smoke and fat spatters. • Ideally the meat should be turned during cooking. • To grill large joints of meat (roast beef and other roast meats). • The oven door must be kept closed during the cooking cycle. [. . . ] The residual heat indicator remains on to indicate that the cooktop is in use. To deselect, turn the knob to"0". Veal, Beef, Pork X Chicken, Rabbit, Duck Turkey (kg. 3-5) Goose (2 Kg) FISH(1 kg) Gilt-head, Bass, Tuna, Salmon, Cod FISH (<1 kg - steaks) Swordfish, Tuna VEGETABLES Peppers, Tomatoes, Roast potatoes SWEETS, PASTRIES, ETC. Leavened cakes Filled pies (with cheese) X X X X X X X X X X X X X X X X X Tarts X Apple strudel, Crèpes Biscuits, Sponge rings, Shortbread Choux buns, Sweet sponge rolls Savoury pies, Filled fruit pies, e. g. Pineapple, Peach Lasagna, potatoes au gratin, cannelloni, pasta timbales Bread X X Pizza X X Vol-au-vents X X Soufflés X 50 - 60 30 - 40 40 - 50 20 - 30 20 - 30 30 - 40 15 - 20 X X X X X X X X X X X 40 - 50 50 - 60 50 - 60 20 - 30 30 - 40 35 - 45 35 - 45 50 - 60 45 - 55 40 - 50 40 - 50 30 - 40 70 - 80 160 - 180 170 - 180 100 - 130 100 - 130 60 - 80 60 - 80 50 - 60 50 - 60 50 - 60 50 - 60 40 - 50 40 - 50 60 - 90 60 - 90 40 - 50 Leg of lamb Roast beef Roast potatoes Fish, e. g. gilt-head, trout Fish (steaks) Chicken legs Kebabs Spare ribs 1/2 chicken 1/2 chicken Whole chicken Roast (pork, beef) Duck DUAL ZONE This function accelerates the heating of the selected cooking zone for a specified length of time during the first part of the cooking cycle. To select this function, turn the knob to . Wait until the residual heat indicator for the cooking zone begins to flash, then turn the knob anti-clockwise to the desired ICP (initial cooking power setting. E. g. : if level “1” is selected, the cooking zone will work on full power for 1 minute, after function) which it will continue on power setting“1” until the end of cooking, unless the knob is turned to adjust the power setting. if level “6”is selected, the cooking zone will work on full power for 6 minutes, after which it will continue on power setting “6” until the end of cooking, unless the knob is turned to adjust the power setting. This function can be used with all power settings, except for power setting “10”. This function is used to bring water to the boil rapidly and remains on for a preset time. At the end of the preset time, the cooktop automatically returns to the maximum power setting. This function can be selected even during cooking. Important: Before selecting this function, make sure the pot is positioned on the selected cooking zone in order to avoid any damage to the cooktop surface. The stated performance values for this function are those guaranteed for all glass ceramic cooktops. For this function, place the pot on the selected cooking zone and turn the knob to . To deselect, change the position of the knob. To allow dough to rise, to soften butter taken from the fridge, to keep baby bottles or food warm, also for making yoghurt, melting chocolate, etc. This function is only available when the residual heat indicator is on. For this function, make sure the residual heat indicator of the desired cooking zone is on. To deselect the function, change the position of the knob. FAST BOIL N. B: Cooking times and temperatures are approximate only. GENTLE HEAT This symbol does not correspond to any cooktop function; the heating element is off. HOW TO OPERATE THE COOKTOP The oven control panel features 4 adjustable knobs for cooktop operation. [. . . ] The symbol switches off and switches back on again when the oven starts working automatically at the start of the previously set cooking time. • To adjust the oven turn the thermostat knob to the desired temperature and select the desired function by turning the Selector knob. The acoustic signal sounds to indicate the end of cooking time and that the oven has switched off. • To adjust the oven turn the Selector knob to “0”, then press button 4 to stop the acoustic signal. Setting the timer and selecting Manual Mode Press button 4 to select Manual Mode and proceed in this mode. [. . . ]