User manual WHIRLPOOL ADG 9820 IX PRODUCT FICHE

[. . . ] Electric indicator on control panel (if provided). Refer to the dishwasher loading instructions. D Check the regeneration salt level Load the racks Select a programme Press theP knob and select a programme by turning it. Select additional options If necessary (and if provided). The corresponding indicator lamp lights up. [. . . ] The corresponding indicator lamp lights up. “Cancel” “Change programme in progress” Press On/Off button to switch off the appliance. Press On/Off button to start the selected programme. Press the On/Off button to start the programme Press the On/Off button to switch off the appliance. Press the On/Off button to start the selected programme. Turn on the water tap, close the dishwasher door Wash cycle - Only open the dishwasher if necessary (Warning: beware of hot steam). - If the appliance is switched off during a wash cycle, when switched on again it will resume the cycle from where it was interrupted. Press the On/Off button to switch off the appliance. Warning: When the door is opened steam comes out!Unload the appliance, starting from the lower rack. Switch off the appliance Turn off the water tap, unload the racks Black process 45. 0° 100. 0 LPI 3GB96001. fm Page 3 Tuesday, November 26, 2002 2:39 PM Dishwasher loading instructions and racks provided Upper rack: Crockery holder (A): Depending on the position: up or down: Long-handled utensils, cups and glasses. • Follow recommended detergent dosage. • Select a more intense wash cycle. • The spray arms must be able to turn freely. • Remove any impurities obstructing the water flow *. If crockery is not perfectly clean • The water jet does not reach the crockery. • Spray arm nozzles clogged. • Incorrect detergent/detergent too old. • Use a good quality detergent. Sandy or grainy residues • Clogged filters. • Filters incorrectly assembled. • Check filters regularly/if necessary clean *. • Depending on the material, if necessary use a detergent with a greater whitening power. Colour of plastic parts faded Deposits on crockery • removable • Tomato/carrot juice, . . . • Streaks on the crockery/glasses. • Layer of salt on crockery/glasses. • Increase the rinse aid dosage *. [. . . ] • Use a good quality detergent. Sandy or grainy residues • Clogged filters. • Filters incorrectly assembled. • Check filters regularly/if necessary clean *. • Depending on the material, if necessary use a detergent with a greater whitening power. Colour of plastic parts faded Deposits on crockery • removable • Tomato/carrot juice, . . . • Streaks on the crockery/glasses. • Layer of salt on crockery/glasses. • Increase the rinse aid dosage *. [. . . ]