User manual WHIRLPOOL ADG2040IX

[. . . ] Instructions for Use Istruzioni per l’uso Gebrauchsanweisung Mode d’emploi Instrukcja użytkowania PRECAUTIONS AND GENERAL RECOMMENDATIONS 1. Removing the packaging and inspecting the contents Before using the appliance for the first time The appliance is designed to operate with a minimum ambient temperature of 5°C. This appliance has been tested by the manufacturer to ensure it functions correctly. Such testing may leave slight drips/water marks which will disappear with the first wash. [. . . ] Senses the level of soiling on the dishes and adjusts the program accordingly. When the sensor is detecting the soil level an animation appears in the display and the cycle duration is updated. The PowerClean® option is activated automatically with this program. To deactivate, press the PowerClean® button on the control panel. Crockery to be washed later. X X 7. 5-13 0. 95-1. 45 85-175 Full 2 Pre-Wash Cold — — 4. 0 0. 01 14-16 None 3 Fragile 40°C Lightly soiled crockery, for example glasses and cups. — X 10. 5 0. 85 105-114 Light 4 Rapid 45°C Lightly soiled crockery, with no dried-on food. — X 11. 0 0. 85 30-50 None 5 Eco b 50°C Normally soiled crockery. Standard program the most efficient in terms of its combined energy and water consumption. X X 6. 0 0. 922 240 Full 6 Daily Silent 60°C Normally soiled crockery. X X 11. 0 1. 30 80-95 Full 7 50°C Normally soiled crockery, gentle and quiet thanks to the lower spray pressure. X X 10. 0 1. 20 290-299 Light 8 Steam 70°C Program including steam action dedicated for heavily soiled crockery, pots and pans. Soaking or hand pretreatment is no longer needed. X X 11. 0 1. 75 180-190 Full a. Program data obtained under normal conditions and with default options on. Data may vary depending on ambient conditions and used options. Differences of up to 20 minutes are possible with sensor programs as a result of the appliance’s automatic calibration system. Reference program for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for detailed information on the EN/Standard loading comparison test and other tests, contact the following address: “contact@whirlpool. com”. Power consumption in: Left-on mode: 1. 50 W / Off-mode: 0. 50 W. RECYCLING WATER SYSTEM: these programs save water in a dedicated tank. A TANK CLEANING CYCLE (at least 45 min. ) is automatically run every 30 cycles or after every power off, to assure the best product conditions. ADDITIONAL OPTIONS With each program additional options can be used. A full list of available options working with specific programs can be found in the Program Table on the previous page. All active options are shown on the display in the Option area. Multizone - allows you to choose the washing zones. Press button to select the wash zones between: 1. Washing lower basket and cutlery basket. When function is active, the symbol PowerClean®/Key lock - thanks to the additional power jets this option provides a more intensive and powerful wash in the lower rack, in the specific area. When function is active, the symbol is lit on the display. Press button for 3 seconds to lock or unlock control panel. [. . . ] The Rapid program 40°C / 45°C is intended for quick washing lightly soiled dishes. If used for a full load of medium/heavy soiled dishes, the dishes may not be dried completely. If so, select a standard-length program. For best results, open the door after the end of the program and wait 15 minutes before unloading the appliance. [. . . ]