User manual WHIRLPOOL ADN 202/1 INSTRUCTION FOR USE

[. . . ] 1 2 GB GENERAL INFORMATION The appliance is a vertical display cooler with glass doors and with a fan – are designed for storage of foodstuffs and for chilling of drinks and for a short-term storage of them. This appliance is intended for commercial use!THE APPLIANCE IS ECOLOGICALLY CLEAN, CONTAINING NO MATERIALS HARMFUL TO THE OZONE LAYER: the refrigerant used is R600a, the foaming agent used for the appliance insulation is cyclopentane C5H10. Inside temperature class – S (from –2 °C to +14 °C). [. . . ] This description is adapted for entire group of display coolers. 1 Switch -(ON/OFF); 7 Shelf 2 Thermostat knob 8 Cleaner 3 Thermostat scale - (thermostat) 9 Thermometer* 4 Green signal lamp - (connection to the mains) 10 Condenser 5 Interior light block 11 Compressor 6 Fan * - for the refrigerators ADN 202/1, ADN 203/1, ADN 230/1 NOTE. with door lock: ADN 203/1 , ADN 200/1 , ADN 202/1 , ADN 201/1 REVIEW OF MECHANICAL CONTROL (see fig. 1) 1 ― On / off switch for interior light. On / off switch for interior light I -(ON) O –(OFF) 2 ― Thermostat knob. The thermostat is off when there is a zero (0) in the thermostat indicator space. Turning the thermostat knob clockwise lowers the temperature in the compartment. Marked with the symbol 4 ― Electricity supply indicator, marked with the symbol When the appliance is connected to the electricity supply, the green indicator light is illuminated. 5 GB CHANGING THE OPENING DIRECTION OF THE DOORS It is recommended that changing the opening direction of the doors should be done with a helper. When changing the opening direction of the doors, YOU CAN NOT lay the refrigerator horizontally. Do the actions below in the order they are listed: For models ADN 200/1, ADN 202/1, ADN 201/1, ADN 203/1 (Fig. Turn off the appliance and pull the plug out of the electricity supply socket. Unscrew two screws 7 and remove the bottom bracket 8 together with the set of washers 6 on the axle and the spacer 5. Unscrew two screws 7 and remove the bracket 11. Unscrew the axle 2 together with the nut 1 and washers 3 from the upper bracket and screw all this set on the reverse side of the door; 4. Before hanging the door, turn the door over by 1800 and insert the upper axle in the door. Unscrew fixing screws 12 from doors, remove handles 13 and fix them screwing in free holes on the same side. Before screwing the bottom bracket 8 together with the set of washers and spacers on the reverse side of a cabinet, insert the bracket axle to the door. Screw the bracket 11 on the reverse side of a cabinet. Turn off the appliance and pull the plug out of the electricity supply socket. Unscrew two screws 12 and remove the bottom bracket 13 together with the set of washers 11 on the axle and the spacer 10. Unscrew two screws 12 and remove the bracket 15. [. . . ] At least once a year clean dust away from the back part of the appliance body and the compressor. A soft brush, electrostatic cloth or vacuum cleaner may be used for cleaning.  DO NOT use detergents containing abrasive particles, acid, alcohol or benzene for cleaning the appliance inner and outer surfaces.  DO NOT use for cleaning cloths or sponges that have coarse surfaces intended for scrubbing. [. . . ]