User manual WHIRLPOOL ADP 688 WH PROGRAM CHART

[. . . ] Use the on / off button to turn the machine on. Check the salt and rinse aid level indicator lights. If necessary, refill salt and/or rinse aid. Use the programme selection button to choose your washing programme. [. . . ] Stop the programme with the start / pause button if you would like to open the door once the dishwasher’s washing programme is running. Pre-wash 30 Min. Delicate Bio Normal Intensive Hygiene Auto Half Load (1/2) button When there are few dishes, you press this button after pressing the programme selection button. When turning the dishwasher on, the indicator light on the button lights up. This function helps you to save water and energy. Time pre-selection The function button for time pre-selection allows you to delay the start time of the programmes by up to 24 hours. Use the + and – Buttons to select the desired time. The display shows you the time remaining until the programme starts. When the time has expired, the washing process begins. While the programme is running, the display shows the remaining time. The selected programme is shown by the programme light; the LED progress indicator lights show the active programme segment. When the programme is complete, the display shows 00. 2 2 Rinse aid level indicator light 3 If this indicator light comes on, you have to refill rinse aid. You can also tell whether rinse aid must be refilled by looking at the rinse aid dispenser. When the visual fill indicator is dark, there is enough rinse aid in the dispenser. When the colour is light, open the dispenser and refill rinse aid. 3 Key Lock The programme can be locked while your machine is in operation. Activate the key lock by pressing the + and – buttons simultaneously for approx. The key lock indicator light will light up. Repeat the procedure to turn off the key lock. Attention The key lock does not lock the door. You only prevent changes to the set programme. Salt level indicator light 3 When this indicator light comes on, you must refill special salt. [. . . ] The machine will drain the water inside the machine for 45 seconds. The programme is cancelled when start/stop indicator light goes off. Then, you can choose and start a new programme. Attention - Depending on the length of the terminated programme - detergent and rinse aid may still be in the dispensers. Note for Testing Institutes The necessary information for performance testing will be provided upon request. [. . . ]