User manual WHIRLPOOL ADP 7442 A 6S WH INSTALLATION

[. . . ] Use only the hoses provided or new ones, which can be requested from the After-Sales Service. If hoses are not long enough, contact your local dealer. Do not cut hoses and, in the case of appliances fitted with a waterstop system, do not immerse the plastic casing containing the inlet hose in water. Before using the appliance for the first time, check the water inlet and drain hose for leaks. Electrical Connection All local electricity board regulations must be complied with. [. . . ] Do not use the dishwasher until it has been fully assembled. Do not use the dishwasher if it has been damaged in transit. Contact After-Sales Service or your local dealer. Before carrying out any cleaning or maintenance operations, unplug the appliance and turn off the water tap. The same applies in the event of a malfunction. Do not use abrasive products or alcohol on the control panels. All sizes in this installation instruction are given in millimetres. Packaging varies according to the dishwasher model. SL 1. 2. Water connection Connection to the mains water supply must be carried out by a qualified technician in compliance with the manufacturer's instructions and applicable local safety regulations. All local water board regulations must be complied with. The inlet hose must be securely clamped to the water tap to prevent leaks. The inlet water temperature varies according to the model installed. Inlet hose marked: "25°C Max": up to a maximum of 25°C. Other models: up to a maximum of 60°C. Depending on the appliance model, the solenoid valve of the inlet hose will be activated by the mains voltage (see ** assembly instructions). Make sure the inlet and drain hoses are kink-free and are not crushed. Fix the drain hose to the siphon with a clamp to prevent it from coming off during operation. When installing the appliance, make sure water can drain freely (remove the siphon plug if necessary). Use only the hoses provided or new ones, which can be requested from the After-Sales Service. If hoses are not long enough, contact your local dealer. Do not cut hoses and, in the case of appliances fitted with a waterstop system, do not immerse the plastic casing containing the inlet hose in water. Before using the appliance for the first time, check the water inlet and drain hose for leaks. Electrical Connection - All local electricity board regulations must be complied with. [. . . ] General indication The appliance must only be used in the household and according its purpose. Do not use the dishwasher until it has been fully assembled. Do not use the dishwasher if it has been damaged in transit. Contact After-Sales Service or your local dealer. [. . . ]