User manual WHIRLPOOL ADP 9697/3 NBM PROGRAM CHART

[. . . ] GB ADP 9693 / 9697 PROGRAMME CHART Rinse aid level indicator Add rinse aid. Half load button / Multizone Load the upper or lower rack only. This function can be used with any programme. [. . . ] different loads, water temperatures, water hardness and power supply voltage. 1) Programme recommended when using detergents of type A (non enzyme-based detergents). 2) Programme recommended when using detergents of type B (enzyme-based detergents). Reference programme for Test Institute and energy label. 5019 100 91165 (We reserve the right to make technical modifications) Quick Reference Guide Daily check list 1. Arrange crockery so that items do not touch each other. Load cups at an inclination to facilitate water circulation. In general, place the cutlery in the basket with the handles positioned downwards, but ensure that sharp knives and forks that might cause injury are placed in the basket with the handles positioned upwards. Make sure the water jet can reach all loaded items and that the spray arms rotate freely. Turn on the water supply tap before starting the dishwasher. GB Lower rack Upper rack Crockery holders: • Down: cups and long-stemmed glasses. • Up: plates. Half load button / Multizone: Loading the lower rack only: greater washing power, particularly for plates and saucepans. Important: • Switch off the dishwasher once the “Start” indicator lamp has switched off. If you switch off the dishwasher during a wash cycle, when switched on again the dishwasher resumes the cycle from where it was interrupted. [. . . ] • The rack must be level on both sides. Plate holders: • May be removed to increase available space. • To reposition: simply insert in the required position (normal or crosswise). • If regeneration salt is to be added, IMMEDIATELY start a washing programme, to eliminate any residual salt. • Sometimes even when the regeneration salt container is full, the corresponding indicator lamp may illuminate during the first wash cycle. [. . . ]