User manual WHIRLPOOL ADP 974 A WH PRODUCT FICHE

[. . . ] Unload the appliance, starting from the lower rack. Switch off the appliance Turn off the water tap, unload the racks Dishwasher loading instructions and racks provided Upper rack: Multi-purpose support (A): 1) Depending on the position, for longhandles utensils, cups and glasses. May be used in three different positions. Crockery holders (B): Depending on the position, for example plates, cups and long-stemmed glasses. Revolving glass support (C): 2) Depending on the position, for example small or long-stemmed glasses. [. . . ] carving forks, knives) must be arranged with the sharp end facing in towards the appliance. depending on the model Half Load: Load the upper rack (see description of Options). Place the cutlery basket (D) in the upper rack. Rack height adjustment (also when loaded): • Lower adjustment: pull out the two rack handles outwards (E) and lower the rack. • Upper adjustment: pull the two handles (E) upwards until the rack clicks into place (Factory setting). The rack must be level on both sides. Removing the top rack to provide clearance for large items of crockery in the bottom rack: Open the rack guide retainers (F) on the right and left and remove the top rack. When the upper rack is in place the retainers must always be closed. Retainer closed Retainer open F F Lower rack: Depending on the model with fixed or tilting plate holders (G). Half Load: Load the lower rack (see description of Options). Greater washing power, particularly for plates and saucepans. Cutlery basket (J) or (H): Some models are provided with a grid (I) that can be fitted onto the cutlery basket to keep items separated. Cutlery basket (D), if provided, for appliances with half load only. Sharp knives and forks that might cause injury must be placed in the cutlery basket with the sharp end facing downwards. Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in a dishwasher, for example wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. Spare parts which are sold separately: 1) Multi-purpose support (A) - N. WGH 1000 series. What to do if. . . If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem (* see also the corresponding chapter in the user instructions). Problem The appliance is not working Cause • No water supply. (if provided). • Use suitable glasses. • Use suitable cutlery. • Ensure the filter assembly is not clogged and that there is no interruption to the water supply (if necessary, clean the filters *). Press the START button for 2 seconds, until the START indicator lamp switches off. Select a new programme and press the Start button again. If after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the water supply tap, then call our After-Sales Service (see guarantee). Before contacting our After-Sales Service, take note of the following: • The nature of the fault • The appliance type and model • The service code (the number indicated on the adhesive rating plate) inside the door on the right-hand side. Before using the dishwasher, read the user instructions! ADP 4109 Quick Reference Guide GB Programme settings without start delay Start delay and programme settings Switch on the appliance - press the ON/OFF button. The selected start delay lamp (3-6-9h) flashes. Programme selector knob 1 1 2 On / Off button Press the Start button for confirmation. After that the Start lamp switches off and the selected start delay lamp lights up. If you wish another time setting, press Start button again. 3 2 Start button Switches “on” when the dishwasher is operating. Switches off at the end of the programme. Turn the programme knob to your desired programme position. Press the Start button for confirmation. The dishwasher starts immediately or after the start delay selected. [. . . ] The dishwasher starts immediately or after the start delay selected. For a Reset, press the Start button at a minimum of 2 seconds. Indication: In the selection mode, all described settings have to be selected within 30 seconds, otherwise no settings will be saved. 4 5 3 Programme chart Programmes Loading instructions Detergent 2) A X X Consumption 3) Litres kWh Minutes B X Quickwash Eco 1) Intensive 40°C 50°C 70°C Lightly soiled crockery with no dried-on food. Recommended programme for heavily soiled crockery, especially suitable for pans and saucepans. [. . . ]